[asterisk-users] [Copfilter] Copy of quarantined email - *** SPAM *** [6.6/6.0] Problems getting Asterisk to detect call in
suich at yunord.net
suich at yunord.net
Thu Nov 29 01:52:16 CST 2007
I have installed an Asterisk 1.4 on Suse93 using a FritzCard.
Some calls are logged to the ISDN log, but Asterisk is not detecting
incoming calls.
I wonder whether some other device or process is preventing Asterisk
from gaining access to the isdn line?
Is there some way to ensure that only Asterisk can listening to the
line, or get it to share the line with some other device, such as the
fax system or some other thing?
Any ideas?
Here some of the conf files.
output of capiinfo command
====================
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.11-07 (49.23)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
==================
/etc/isdn/isdn.conf
=============
#SuSEconfig.isdn modified unknown
# example of /etc/isdn/isdn.conf
#
# More information: /*
[GLOBAL]
COUNTRYPREFIX = +
COUNTRYCODE = 44
AREAPREFIX = 0
AREACODE = 20
[VARIABLES]
[ISDNLOG]
LOGFILE = /var/log/isdn.log
ILABEL = %b %e %T %ICall to tei %t from %N2 on %n2
OLABEL = %b %e %T %Itei %t calling %N2 with '%n0'
REPFMTWWW = "%X %D %17.17H %T %-17.17F %-20.20l SI: %S %9u %U %I %O"
REPFMTSHORT = "%X%D %8.8H %T %-14.14F%U%I %O"
REPFMTNIO = " %X %D %16.16H %T %-25.25F %U"
REPFMT = " %X %D %16.16H %T %-16.16F %7u %U %I %O"
###########################################################################
#
# You can set a daily limit for phone cost for the ISDN interface here.
# Please note following points and also read the isdnlog documentation:
#
# 1. This function may fail for many reasons, here is no guarantee that
# this protect you against high cost.
# Please be very carefully if you enable dial on demand !!!
#
# 2. Neither SuSE Linux AG nor the authors of the software are responsible
# for any damage or costs you have if you use or not use this feature.
#
# 3. If the charges are going above the limit /etc/isdn/stop is called
# and depending on the amount following actions are done:
# - 0..1 Euro above limit : short warning with 2 beeps
# - 2 Euro above limit : longer warning with 3 beeps
# - 3..4 Euro above limit : warning with 5 beeps shutdown isdn
# network interfaces
# - >= 5 Euro above limit : reboot PC
#
# If you like other actions or values please modify /etc/isdn/stop
#
# 4. The number of your provider need an entry in /etc/isdn/callerid.conf,
# without CHARGEMAX has no effect.
#
# 5. Since it can cause unwanted network shutdowns or reboots, CHARGEMAX
# is disabled by default
#
###########################################################################
# CHARGEMAX = 50.00
CURRENCY = 0.062,EUR
COUNTRYFILE = /usr/lib/isdn/country.dat
RATECONF= /etc/isdn/rate.conf
# replace the xx in the next 3 lines with your country's letters!
RATEFILE= /usr/lib/isdn/rate-xx.dat
HOLIDAYS= /usr/lib/isdn/holiday-xx.dat
ZONEFILE= /usr/lib/isdn/zone-xx-%s.cdb
DESTFILE= /usr/lib/isdn/dest.cdb
==========================
/etc/capi.conf
===========
#SuSEconfig.isdn generated
# card file proto io irq mem cardnr options
fcpci - - - - - 1
=======================
/etc/asterisk/capi.conf
===========================
;
; CAPI config
;
;
; general section
[general]
nationalprefix=0
internationalprefix=00
rxgain=1.0 ;linear receive gain (1.0 = no change)
txgain=1.0 ;linear transmit gain (1.0 = no change)
language=de ;set default language
;ulaw=yes ;set this, if you live in u-law world instead of a-law
;jb..... ;with Asterisk 1.4 you can configure jitterbuffer,
;see Asterisk documentation for all jb* setting available.
;mohinterpret=default ;Asterisk 1.4: default music on hold class when
placed on hold.
; interface sections ...
[ISDN1] ;this example interface gets name 'ISDN1' and may be any
;name not starting with 'g' or 'contr'.
;Use one interface section for each isdn port!
;ntmode=yes ;if isdn card operates in nt mode, set this to yes
isdnmode=msn ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial)
;when using NT-mode, 'DID' should be set in any case
incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = any
;defaultcid=123 ;set a default caller id to that interface for dial-out,
;this caller id will be used when dial option 'd' is set.
;controller=0 ;ISDN4BSD default
;controller=7 ;ISDN4BSD USB default
controller=1 ;capi controller number of this interface/port
group=1 ;dialout group
;prefix=0 ;set a prefix to calling number on incoming calls
softdtmf=on ;enable/disable software dtmf detection, recommended
for AVM ca rds
relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection
faxdetect=off ;enable faxdetection and redirection to EXTEN 'fax'
for incomin g and/or
;outgoing calls. (default='off', possible values:
'incoming','o utgoing','both')
accountcode= ;PBX accountcode to use in CDRs
;amaflags=default;AMA flags for CDR ('default', 'omit', 'billing', or
'documenta tion')
context=capi-in ;context for incoming calls
;holdtype=hold ;when the PBX puts the call on hold, ISDN HOLD will be used. If
;set to 'local' (default value), no hold is done and
the PBX ma y
;play MOH.
;immediate=yes ;DID: immediate start of pbx with extension 's' if no
digits we re
; received on incoming call (no destination number yet)
;MSN: start pbx on CONNECT_IND and don't wait for
SETUP/SENDING -COMPLETE.
; info like REDIRECTINGNUMBER may be lost, but
this is nece ssary for
; drivers/pbx/telco which does not send SETUP or
SENDING-CO MPLETE.
;echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression
;echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation (yes=g165)
;(possible values: 'no', 'yes', 'force', 'g164', 'g165')
echocancelold=yes;use facility selector 6 instead of correct 8
(necessary for ol der eicon drivers)
;echotail=64 ;echo cancel tail setting (default=0 for maximum)
;echocancelnlp=1 ;activate non-linear-processing; this improves echo
cancel rati o, but might
;incorporate variable gain in the signal path.
;bridge=yes ;native bridging (CAPI line interconnect) if available
;callgroup=1 ;PBX call group
;pickupgroup=1 ;PBX pickup group (which call groups are we allowed to pickup)
;language=de ;set language for this device (overwrites default language)
;disallow=all ;RTP codec selection (valid with Eicon DIVA Server only)
;allow=all ;RTP codec selection (valid with Eicon DIVA Server only)
devices=2 ;number of concurrent calls (b-channels) on this controller
;(2 makes sense for single BRI, 30/23 for PRI/T1)
;jb..... ;with Asterisk 1.4 you can configure jitterbuffer,
;see Asterisk documentation for all jb* setting available.
;mohinterpret=default ;Asterisk 1.4: default music on hold class when
placed on hold.
;qsig=1 ;enable use of Q.SIG extensions. ECMA Variant
;qsig_prnum=1234 ;enable inbound bridging - this should be an
QSIG-network-wide unique number
============================
asterisk*CLI> module show like capi
===========================
Module Description
Use Count
chan_capi.so Common ISDN API Driver (1.0.2) 0
1 modules loaded
======================
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
.
More information about the asterisk-users
mailing list