[asterisk-users] dial in group

[Gordon Henderson]

On Sat, 24 Nov 2007, Rilawich Ango wrote:

> I have a TDM400 with all FXO module in it. Only one channel (say
> channel 3) is plugged to PSTN. In my understand, a dial command
> Dial(zap/g1/12345677) should search an available channel, which is 3,
> in group 1 to make a call. However, I found that it will still use
> channel 1 to make call even it hasn't plugged to the PSTN. Below are
> the conf files.
>
> --zapata.conf--
> group=1
> signalling=fxs_ks
> context=incoming
> channel => 1-8

You really only want

   channel => 3

here if it's only channel 3 that's plugged in.

Gordon