[asterisk-users] Annoying PRI Channels Restarting Message

[Michael J. Liberatore]

Great thanks steve and bj.  As long as its normal I guess I can deal
with leaving it at the default.  I was just concerned it could be an
error with the line, when I first hooked up the t1 I noticed the line
going up/down/up/down for 4 or 5 cycles before finally working.  

Is there a reason it resets?  Aka does it serve any kind of purpose?

Thanks!

Mike

 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Totaro
Sent: Friday, November 23, 2007 9:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Annoying PRI Channels Restarting Message

Wrong.  Set resetinteral if it is too annoying but it is normal behavior
although I remember it causing issues with some people in Italy if
memory serves me correctly.

 From the wiki
*resetinterval*: sets the time in seconds between restart of unused
channels, defaults to 3600 minimum 60 seconds. Some PBXs don't like
channel restarts. so set the interval to a very long interval e.g.
100000000 or 'never' to disable *entirely*.

*If you are in Israel, the following is important:*

As Bezeq in Israel doesn't like the B-Channel resets happening on the
lines, it is best to set the resetinterval to 'never' when installing a
box in Israel. Our past experience also shows that this parameter may
also cause issues on local switches in the UK and China.

*For more information:* tech at asterisk.org.il

Thanks,
Steve

Alex Balashov wrote:
> My guess is that the B channels are in fact bouncing in and out of 
> service and the message is a reflection of it.
>
> On Fri, 23 Nov 2007, Michael J. Liberatore wrote:
>
>   
>> Hi all, i have recently setup a p2p t1 using sangoma t1 cards and 
>> asterisk 1.4.  Its working great but i am getting an annoying message

>> every little while in asterisk:
>>
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/16
>> restarted on span 2
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/17
>> restarted on span 2
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/18
>> restarted on span 2
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/19
>> restarted on span 2
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/20
>> restarted on span 2
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/21
>> restarted on span 2
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/22
>> restarted on span 2
>> [Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/23
>> restarted on span 2
>>
>>
>> Basically this goes through all 23 channels and then says its was 
>> successfully restarted.
>>
>> the link doesnt appear to be going down because there is nothing in 
>> the system log that normally comes up when the link actually goes up 
>> or down.  this appears to be some asterisk thing.  its not affecting 
>> calls as far as i can tell and doesnt seem to happen when the 
>> channels are in use.
>>
>> Any ideas?  Can this be ignored?  If so, can i safely disable this by

>> changing it to a debug message in the code?  Thats what i did with an

>> annoying message caused by setting ext 700 as a orbit on a snom
phone.
>>
>> Thanks
>>
>> Mike
>>
>>
>>
>>
>> This E-mail, including any attachments, may be intended solely for 
>> the personal and confidential use of the sender and recipient(s) 
>> named above. This message may include advisory, consultative and/or 
>> deliberative material and, as such, would be privileged and 
>> confidential and not a public document. Pursuant to 42 CFR, any 
>> information in this e-mail identifying a former, present, or
potential client of Straight & Narrow is confidential. If you have
received this e-mail in error, you must not review, transmit, convert to
hard copy, copy, use or disseminate this e-mail or any attachments to it
and you must delete this message. You are requested to notify the sender
by return e-mail.
>>
>>
>>     
>
> --
> Alex Balashov
> Evariste Systems
> Web    : http://www.evaristesys.com/
> Tel    : +1-678-954-0670
> Direct : +1-678-954-0671
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>   


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users