[asterisk-users] Building an Asterisk 1.4 RPM

[Jonn R Taylor]

http://www.voip-info.org/tiki-index.php?page=Asterisk%20RPM

 

Try this link. There is a lot of info and source rpms that you can rebuild.

 

Jonn

 

  _____  

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Douglas Garstang
Sent: Tuesday, November 20, 2007 6:34 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Building an Asterisk 1.4 RPM

 

I'm a little confused. I'd like to build an RPM for Asterisk 1.4.

Is it better to modify and use the spec file under redhat/asterisk.spec and run a 'make rpm', OR is it better to build a custom spec file from scratch and use 'rpmbuid -ba' <specfile>?

How do people normally do it?

The problem I see with a custom spec file is that since the source is all contained within a tar.gz file, there's no way to interactively run a 'make menuselect' first and customise or remove what you don't need. For example, if I don't do this, the ogg vorbis module is installed by default, and then when I go to install my rpm, there's complaints all round if the ogg vorbis libs aren't already installed.

Doug.

 

 

 

  _____  

Never miss a thing. Make Yahoo <http://us.rd.yahoo.com/evt=51438/*http:/www.yahoo.com/r/hs>  your homepage. 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071120/8d560d31/attachment.htm