[asterisk-users] Route an incoming call by ANI*DNIS

[Dan Casey]

Sorry for my very delayed response.  To answer a few questions:
1. Right, the *ANI*DNIS* is not working correctly.  When the telco sends
it, we are always missing the beginning of it.  I almost always get a 7
digit ani, but sometimes it is 8 or 6.

2. The phone company assured me several times that we are not set up for
feature group d.  I tried anyway and it had the same affect.  "Got a
non-Feature Group D input on channel 77.  Assuming E&M Wink instead"..
Pretty smart.

3. I've also triad featb featdmf and featdmf_ta. All of which were the
same or much works.  Featb atcually crashed my polycom phone when I
tried to dial into the pbx. :)

4. I didn't try 5ess as were are not using a pri.  After this whole
ordeal, where contemplating having all our t1's switched to pri.  That
would really be a bad thing, but its a pretty drastic measure.

5.  The callerid issue is partially solved.  I handled it with
CALLERID=$DID.  The main phone system runs a perl script to parse, and
handle the rest of it.  Which actually I like this better, because I
don't have to setup extensions for every DNIS.. I have about 50 of them.


We are still having the same signaling issue with both XO and GBX. 
Heres the problem I'm getting in asterisk.
1. A wink issue
"Nov 19 05:35:06 DEBUG[12565] chan_zap.c: Got wink in weird state 4 on
channel 92"

2.  Calls that drop randomly
Nov 19 12:29:51 DEBUG[15370] channel.c: Avoiding initial deadlock for
'SIP/1026-b7901568'
Nov 19 12:31:02 DEBUG[22546] channel.c: Didn't get a frame from channel:
SIP/1026-b7901568
Nov 19 12:31:02 DEBUG[22546] channel.c: Bridge stops bridging channels
SIP/1026-b7901568 and Zap/1-1

3. Two phone companies that say I'm sending too many winks went the
seizure, and a Digium rep who says it should just work.
I am shot...

Surely I can't be the only person who has this problem.  Is there anyone
else not using PRI, who had issues like this.??

Dan


Jon Weisman wrote:
> Dan,
>
> What happen w/ this? Did you figure it out? I've setup w/ XO using ESF/B8ZS, 
> and 5ESS for the switchtype, worked great and got the ANI as well. I dont 
> think you can get ANI on E&M Wink trunks, how about feature group d?
>
> -Jon
>
>
> ----- Original Message ----- 
> From: "Dan Casey" <dcasey at debtresolve.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Friday, November 02, 2007 9:47 AM
> Subject: [asterisk-users] Route an incoming call by ANI*DNIS
>
>
>   
>> does anyone know how to route a call coming in with ANI*DNIS*
>>
>> Oct 31 12:47:41 VERBOSE[30056] logger.c:     -- Executing
>> Set("Zap/49-1", "DID=1231234*4812*") in new stack
>>
>>
>>
>> I tried making a route for _.*4812*  but that matched everything rather
>> then just the dnis i wanted..  any ideas?
>>
>> I would preferably like pass the callerid along to my extensions, but
>> for now the important thing is routing.
>>
>>
>> Thanks
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>     
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071119/68afe02a/attachment.htm