[asterisk-users] Issues after upgrading from 1.2 to 1.4: hangup immediately

[Eric "ManxPower" Wieling]

Look at the section starting on line 100 in 
/path/to/src/asterisk-1.4.13/UPGRADE.txt

You should have read this file before upgrading to 1.4.

Jean-Yves Avenard wrote:
> Dear all
> 
> I am trying to upgrade our asterisk from 1.2 to 1.4.x
> 
> There is something that now fails to work, reading the various
> documentations, I can not explain why.
> 
> Here is an extract of my extensions.conf
> 
> [welcome]
> exten => 299,1,Answer                   ; Answer the line
> exten => 299,2,Set(TIMEOUT(digit)=5)            ; Set Digit Timeout to 5 seconds
> exten => 299,3,Set(TIMEOUT(response)=10)                ; Set Response
> Timeout to 10 seconds
> exten => 299,4,BackGround(welcome)     ; Play Welcome to ...
> 
> include => internal-sip
> 
> exten => t,1,Goto(0,1)          ; If they take too long, go back to default
> exten => i,1,Playback(invalid)  ; "That's not valid, try again"
> exten => i,2,Goto(s,2)          ; try again
> 
> ----
> 
> However, right after playing welcome, it will hangup !
> this used to wait 10s then fall on the extension t
> 
> This is what I see on the console:
>    -- Executing [299 at welcome:1] Answer("Zap/5-1", "") in new stack
>     -- Executing [299 at welcome:2] Goto("Zap/5-1", "|s|1") in new stack
>     -- Goto (welcome,s,1)
>     -- Executing [s at welcome:1] Set("Zap/5-1", "TIMEOUT(digit)=5") in new stack
>     -- Digit timeout set to 5
>     -- Executing [s at welcome:2] Set("Zap/5-1", "TIMEOUT(response)=10")
> in new stack
>     -- Response timeout set to 10
>     -- Executing [s at welcome:3] BackGround("Zap/5-1", "hello") in new stack
>     -- <Zap/5-1> Playing 'transfer' (language 'en')
>   == Auto fallthrough, channel 'Zap/5-1' status is 'UNKNOWN'
>     -- Hungup 'Zap/5-1'