[asterisk-users] Connection astrisk to a RAS (portmaster)

[Nicolas Ross]

Thanks,

That's not it.

I juste uninstalled wanpipe, redownloaded zaptel (another version (1.4.5.1) 
to try), re-installed wanpipe, (patching zaptel in the process), recompile 
wanpipe, re-compiled zaptel, recompiled asterisk, re-installed everything, 
and still got the same errors...

Nicolas


----- Original Message ----- 
From: "Jared Smith" <jsmith at digium.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Thursday, November 01, 2007 9:15 AM
Subject: Re: [asterisk-users] Connection astrisk to a RAS (portmaster)


> On Wed, 2007-10-31 at 20:57 -0400, Nicolas Ross wrote:
>> I also get sometime :
>>
>>   == Primary D-Channel on span 2 down
>> [Oct 31 20:50:53] WARNING[10250]: chan_zap.c:2393 pri_find_dchan: No
>> D-channels available!  Using Primary channel 48 as D-channel anyway!
>>   == Primary D-Channel on span 2 up
>
> I don't claim to be an expert on the Wanpipe drivers, but it's been my
> experience that if your D-channels bounce up and down like that every
> few seconds, that the Wanpipe drivers didn't successfully patch Zaptel,
> or you haven't restarted Zaptel since the Wanpipe drivers patched
> Zaptel.
>
> Hopefully that's enough to get you up and running.
>
>
> -- 
> Jared Smith
> Community Relations Manager
> Digium, Inc.
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>