[asterisk-users] High Port Count ATA

[Douglas Garstang]

Cory,

 

I'm not quite clear on that. Do these channels banks have an IP uplink
port so that each FXS port can SIP register to asterisk?

 

Doug.

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Cory
Andrews
Sent: Thursday, May 31, 2007 2:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] High Port Count ATA

 

Channel banks would work.  Rhino works well, or if you need more chassis
density, try the Carrier Access ADIT600 configured with FXS blades.

 

Cory J Andrews

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Douglas
Garstang
Sent: Thursday, May 31, 2007 4:22 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] High Port Count ATA

 

I'm trying to find a high port count ATA device. We have a lot (up to
110) analog devices that we need to bridge to IP. Rather than go out and
buy 110 ATA's, it would make more sense to buy a single chassis type
device with some number of ports and blades. Anyone know if such a
device exists?

 

Thanks,

Doug.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070531/5b31d5ad/attachment-0001.htm