[asterisk-users] Still cannot make a single call from asterisk via softphone to pstn!!!!!!!

[Jaswinder Singh]

Can you post some output from asterisk cli output while you make call ?

On 30/05/07, BSumrall <Brads at ftnco.com> wrote:
>
>
>
>
> after 18 hours, over 200 pages of reading, a complete reinstall of asterisk
> I am down to this.
>
>  extensions.conf
>
>  [globals]
>  CONSOLE=Console/dsp
>  IAXINFO=guest
>  TRUNK=Zap/g2
>  TRUNKMSD=1
>
>  [default]
>  exten => 8005181896,1,Dial,(IAX2/UXMC)
>  exten => s,1,Answer()
>
>  (I tried)
>  exten => _1XXXXXXXXXX,1,DIAL,(IAX2/teliax/${EXTEN},30,tr)
>  (as well)
>
>  iax.conf
>
>  [general]
>  port=4569
>  bandwidth=low
>  disallow=lpc10
>  jitterbuffer=no
>  forcejitterbuffer=no
>  tos=lowdelay
>  autokill=yes
>
>  register => xxxx:xxxxxxxxxx at voip-co3.teliax.com
>
>  [teliax]
>  context=default
>  type=friend
>  host=voip-co3.teliax.com
>  auth=md5
>  user=xxxx
>  secret=xxxxxxxxx
>  disallow=all
>  allow=ulaw
>  allow=alaw
>  allow=gsm
>
>  sip.conf
>
>  [UXMC]
>  user=xxxxxxx
>  context=internal
>  type=friend
>  qualify=yes
>  nat=no
>  secret=xxxxxxxx
>  canreinvite=no
>  host=dynamic
>  nat=no
>
>  If I put back previous config, I can call into the 1800 number and here
> that silly chick heckle me from my server!
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>