[asterisk-users] Alcatel - Asterisk setup

[Vieri]

According to
http://www.voip-info.org/wiki/view/Alcatel+4400+via+PRI
the author had trouble with QSIG.

It would be great if you could give me an extract of
your zapata.conf in your successful QSIG setup. And
any other tip for that matter.

--- Jorge Mendoza <mendoza at tcc.com.pe> wrote:

> In my experience, many times Qsig is mandatory for
> interconnection
> between Asterisk and others PBX using PRI.
> 
> Jorge Mendoza
> 
> Vieri wrote:
> > I'm having the same trouble when the
> Alcatel-Asterisk
> > trunk has "prefix meaning" set to "open routing
> > number".
> > I enabled overlapdial but still get the same
> behavior.
> > When it's set to "routing number" Asterisk
> receives
> > the full dialed number but it's limited to a
> maximum
> > of 8 digits.
> >
> > Has anyone solved this "open routing number" issue
> > that passes only the first digit and ignores the
> rest?
> >
> > --- Sahil Gupta <sgupta at voicevalley.com.au> wrote:
> >
> >   
> >> Hi,
> >> You need to enable overlapdial.
> >>
> >> Regards,
> >>
> >>
> >> Sahil Gupta
> >> Chief Executive Officer
> >> VoiceValley Group of Companies
> >>
> >> Phone: +61-7-30188403
> >> Fax: +61-7-30188499
> >>
> >> On Tue, 29 May 2007, Carlos Hernandez wrote:
> >>
> >>     
> >>> Hi all:
> >>>
> >>> We are looking for someone with experience in
> >>>       
> >> Alcatel PBX  - PRI - Asterisk 
> >>     
> >>> integration
> >>>
> >>> Please get in touch off list.. We're wanting to
> >>>       
> >> hire a professional 
> >>     
> >>> subcontractor, developer or company to get
> around
> >>>       
> >> some issues like these:
> >>     
> >>> Asterisk shows PRI to Alcatel is up, but when
> >>>       
> >> trying to dial from Alcatel to 
> >>     
> >>> Asterisk results in a disc tone
> >>> (Asterisk do send calls properly into Alcatel)
> >>>
> >>> If / when we manage to get anything from
> Alcatel,
> >>>       
> >> we get just the first digit 
> >>     
> >>> of the number the user is intending to call..
> >>>       
> >> Asterisk expects the whole 
> >>     
> >>> number at once, so it fails..
> >>> Most of the time we get nothing at all from
> >>>       
> >> Alcatel, we think something is 
> >>     
> >>> missing, so Alcatel sees the link is down.
> >>>
> >>> Please let me know if you have done this type of
> >>>       
> >> work before. We are not 
> >>     
> >>> wanting to involve the Alcatel people, unless
> >>>       
> >> really required.
> >>     
> >>> Is there any special way to set up zaptel/zapata
> >>>       
> >> so Alcatel detects the PRI 
> >>     
> >>> to be operational?
> >>> Is there any special way to receive the calls
> once
> >>>       
> >> the PRI is up?
> >>     
> >>> Right now asterisk is set with:  pri_net 
> >>> Any information or hints will be greatly
> >>>       
> >> appreciated
> >>     
> >>> Thank you,
> >>> Carlos
> >>> NZ



       
____________________________________________________________________________________You snooze, you lose. Get messages ASAP with AutoCheck
in the all-new Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/newmail_html.html