[asterisk-users] Asterisk in Xen domu with tdm400 hardware

[Adam Robins]

Thanks, but we do not use any zap hardware in these systems.  It is straight SIP.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of François Delawarde
Sent: Tuesday, May 29, 2007 10:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk in Xen domu with tdm400 hardware

Hi,

Be careful with believing too much that your zaptel hardware will work 
together with xen, you could have problems like the ones described in 
the thread linked below:

http://www.mail-archive.com/asterisk-users@lists.digium.com/msg180825.html

Good luck,
François.



Adam Robins wrote:
> We are running Asterisk on native CentOS.  We then install VMWare on
> CentOS with Windows 2003 in the VMWare partition for AD services.  We
> have 50+ users in a call center environment with no issues.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jonathan
> Creasy
> Sent: Sunday, May 27, 2007 11:52 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Asterisk in Xen domu with tdm400 hardware
>
> Why would you want to do this?
>
> If you wanted to run multiple systems together on an Asterisk server I 
> would run the Asterisk server on Dom0 and the other stuff on DomU
> systems.
>
> -Jonathan
>
> James Harper wrote:
>   
>> I did it back in the xen 2.x days with a BRI adapter (Traverse
>>     
> NetJet).
>   
>> It worked fine for the testing I was doing.
>>
>> I'm not sure of the status or performance of the PCI mapping through
>>     
> to
>   
>> DomU these days, but that should be the only extra step required.
>>
>> James
>>
>>   
>>     
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>>> bounces at lists.digium.com] On Behalf Of Roberto Pereyra
>>> Sent: Saturday, 26 May 2007 23:06
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: [asterisk-users] Asterisk in Xen domu with tdm400 hardware
>>>
>>> Hi all !!!
>>>
>>> I would like to install asterisk in Xen domU using TDM400 hardware.
>>>
>>> Somebody know a howto or tutorial about that ?
>>>
>>> Thanks in advance
>>>
>>> roberto
>>>
>>> --
>>> Ing. Roberto Pereyra
>>> ContenidosOnline
>>> http://www.contenidosonline.com.ar
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>     
>>>       
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>   
>>     
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users