[asterisk-users] Multiple TDM400p cards in one machine -- nolonger an issue?

[Steve Totaro]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Lee Jenkins
> Sent: Monday, May 28, 2007 8:57 PM
> To: Chris Earle; Asterisk Users Mailing List - Non-Commercial
Discussion
> Subject: Re: [asterisk-users] Multiple TDM400p cards in one machine --
> nolonger an issue?
> 
> Chris Earle wrote:
> > Hi all,
> >
> > Years ago, I was pretty sure attempting to use two TDM400p cards in
one
> > machine was recommended against by Digium ... probably because the
cards
> > couldn't hack it, and/or interrupt problems etc
> >
> > I have seen some posts recently that seem to indicate it is in fact
> possible
> > these days thanks to some updated firmware perhaps? ..... I just
need to
> > have two in the server because the 4 ports aren't enough ...
> >
> > I'd rather just expand by one card rather than get a TDM2400 (or
> TDM800??)
> >
> > Anyone had recent success/failure with this sort of thing?
> >
> >
> 
> Sangoma Remora Card may be an option?
> 
> http://www.sangoma.com/datasheets/p_a200-specs
> 
> --
> 
> Warm Regards,
> 
> Lee
> 

Maybe it is time to look at a fractional T1?  I recently used
www.shopfort1.com for realtime pricing.  

Thanks,
Steve