[asterisk-users] ZAPTEL problem

[Tzafrir Cohen]

On Mon, May 28, 2007 at 02:22:34PM +0530, ram wrote:
> Hi
> 
> I have 100XP Digium clone card
> 
> Installed in my pc
> 
> and compiled zaptel and asterisk again after installing the card
> 
> but after i  rebooted
> 
> i can load zaptel and wcfxo modprobe with out any problem
> 
> but when i intiated ztcfg -vvvv
> 
> i get the following error
> 
> 
> Zaptel Configuration
> ======================
> 
> 
> 1 channels configured.
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)

No device to talk to. Why?

> 
> 
> 
> ---------------------
> 
> dmesg errors
> 
> Zapata Telephony Interface Unloaded
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: SVN-branch-1.2-r1725 Echo Canceller: KB1
> Failed to initailize DAA, giving up...
> wcfxo: probe of 0000:00:10.0 failed with error -5

The problem is here. Defective card? PCI-level problems?

An example of PCI-level issues is the following "magic" that worked
for me with several cards with some computers (at least with some 
specific kernels) - adding the boot parameter 'pci=noacpi' to the kernel 
command-line.

> 
> --------------
> 
> lspci
> 
> 00:0c.1 SCSI storage controller: Adaptec AIC-7896U2/7897U2
> 00:10.0 Communication controller: Motorola Unknown device 5608

I assume that the second line is the X100P card.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir