[asterisk-users] Net 2 Phone - Asterisk - Problem

[Salah Eddine ELMRABET]

Hi,

Check the codec used on your sip.conf

make allow-ulaw

It will work fine, i had the sae problem cause i was using Ilbc.

Regards,


On 5/22/07, Milton Davila <davila.milton at gmail.com> wrote:
>
> Hi there,
>
> I am having some problems while trying to place phone calls through
> Asterisk to Net2phone, this is my setup:
>
> I have a SIP phone connected directly to my Asterisk box from where I want
> the call to origin; in sip.conf:
>
> [mySIP]
> type=friend
> username=mySIP
> secret=mySecret
> host=dynamic
> context=outgoing
>
> I read that I have to make some changes in sip.conf, in order to make it
> work with Net2phone:
>
> http://www.voip-info.org/wiki/view/Asterisk+settings+Net2phone
>
> So these are the changes I made in sip.conf:
>
> [general]
> useragent = X-Lite release 1103m
> register => PHONENUMBER:PASSWORD at sip.net2phone.com
>
> [net2phone]
> type = peer
> host = sip.net2phone.com
> username = PHONENUMBER
> secret = PASSWORD
> fromuser = PHONENUMBER
> fromdomain = net2phone.com
> context = incoming
> insecure = very
> canreinvite = no
>
> Now here is my extensions.conf:
>
> [outgoing]
> exten => _9NXXNXXXXXX,1,Dial(SIP/net2phone/${EXTEN:1})
>
> If I type "sip show registry" in the Asterisk console, it shows that the
> state of the Net2phone sip is "Registered".
>
> The problem is that when I call any phone is USA: 1-XXX-XXX-XXXX, I only
> get a busy tone. So I can never really place a call.
>
> What can be the problem?
>
> I am using Asterisk 1.4.2 on Red Hat Enterprise Linux 5.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070526/33a9d0e7/attachment.htm