[asterisk-users] Local SMS how-to.

[Jonson Player]

I tried ... still same errors:

---<Cut Here>---
May 23 10:56:35 WARNING[31660]: pbx_spool.c:347 scan_service: Unable to open
/var/spool/asterisk/outgoing/smsq.mttx.0.1179906994-32569.1: Permission
denied, deleting
May 23 10:56:35 WARNING[31660]: pbx_spool.c:389 scan_thread: Failed to scan
service '/var/spool/asterisk/outgoing/smsq.mttx.0.1179906994-32569.1'
May 23 10:57:31 WARNING[31660]: pbx_spool.c:347 scan_service: Unable to open
/var/spool/asterisk/outgoing/smsq.mttx.0.1179907051-32570.1: Permission
denied, deleting
May 23 10:57:31 WARNING[31660]: pbx_spool.c:389 scan_thread: Failed to scan
service '/var/spool/asterisk/outgoing/smsq.mttx.0.1179907051-32570.1'
---<And Here>---


On 5/22/07, Anselm Martin Hoffmeister <anselm at hoffmeister-online.de> wrote:
>
> Am Dienstag, den 22.05.2007, 17:35 +0300 schrieb Jonson Player:
> > Thank you for reply. Can you send me some working configs? I'm still
> > confusing about this sms option.
>
> Just to get you started, try this:
>
> Find out which user asterisk runs as. Get a shell for that user.
> Run (all in one line)
>
> smsq --mt --oa=321 --mttx-callerid=01930101 --mttx-channel=SIP/abcde
> "message text goes here"
>
> where "321" will displayed as sender id on the handset, and "01930101"
> will have to replaced by the mobile center known to your phone, plus "1"
> at the end - the German T-Com seems to use 0193010, and this setting
> works for me. Further, SIP/abcde must be the channel that a SMS-capable
> handset is available on: If you have some ATA with a DECT handset
> connected, or similar, use the channel name exactly as you would in the
> Dial() command.
>
> First thing to find out is if this works. Be sure to have asterisk in
> extra-verbose running a console to see what happens.
>
> If the mobile handset rings (instead of getting the SMS) either the
> 01930101 number has not been set correctly or it probably is not
> compatible with Asterisk SMS.
>
> Once you get this far, you would need the other way round. When your
> mobile phone tries to _send_ a text message, it will go to 01930100 (sms
> center number plus "0"). You will have to care for that in your
> extensions.conf, like this
>
> exten => 01930100,1,Wait(2)
> exten => 01930100,2,Answer()
> exten => 01930100,3,Wait(2)
> exten => 01930100,4,SMS(01930100,as)
> exten => 01930100,5,Wait(2)
> exten => 01930100,6,Hangup()
>
> In my experience those Wait(2) improve reliability over internet
> connections, they probably are superfluous if you have reliable
> low-latency LAN. For me, they made the difference between 10/100 and
> 95/100 successfuly sent messages.
>
> You will have to write your own scriptwork to play with the files that
> will be created from those commands. Their structure is simple, you will
> find out.
>
> Sending EMS (for ringtones and bitmaps) is a bit more complex, you will
> need the UDH flag for that. I think I documented that once on this ML
> but am not sure. However, it is possible with some Siemens Gigaset
> devices, and pictures or monophonic ringtones.
>
> BR
> Anselm
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070523/a06e96e8/attachment.htm