[asterisk-users] CAS signalling conflicts with Clear channel

[Nitesh Divecha]

Vieri,

Make sure you are loading the digital card first and then analog card.
I had the same problem and Digium engineers helped me out.

Cheers,
Nitesh


Vieri wrote:
> --- David Gomillion <david.gomillion at gmail.com> wrote:
>
>   
>> On 5/21/07, Vieri <rentorbuy at yahoo.com> wrote:
>>     
>>> Hi,
>>>
>>> My asterisk server was working with a 4-FXO analog
>>> card (TDM400P).
>>>
>>> I recently added two digital cards: a TE120P (1
>>>       
>> PRI)
>>     
>>> and a B410P (4 BRI).
>>>
>>> The B410P is still unconfigured but inserted in a
>>>       
>> PCI
>>     
>>> slot.
>>>
>>> The TE120P's jumper is set to E1 as it will
>>>       
>> connect to
>>     
>>> a commercial PBX's PRI card also configured as E1.
>>>
>>> My analog channels used to be 1-4 but since I
>>>       
>> added
>>     
>>> the new cards I changed them to 101-104.
>>>       
>> I could be wrong here, but I don't think you get to
>> arbitrarily make up what
>> the channel numbers. At least I've never done that;
>> I let the first channel
>> be 1, second one 2, etc, through all of the cards,
>> based on loading order of
>> the PCI cards. And are you sure about the loading
>> order of the cards?
>>     
>
> I'm sure you're right because the following yields no
> error:
>
> # misdn-init stop
> # rmmod wctdm
> # rmmod xpp
> # rmmod wcte12xp
> # rmmod zaptel
> # modprobe -a zaptel
> # modprobe -a wcte12xp
> # ztcfg -vvvvv
>
> Zaptel Configuration
> ======================
>
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet
> (DSX-1)
>
> Channel map:
>
> Channel 01: Clear channel (Default) (Slaves: 01)
> Channel 02: Clear channel (Default) (Slaves: 02)
> Channel 03: Clear channel (Default) (Slaves: 03)
> Channel 04: Clear channel (Default) (Slaves: 04)
> Channel 05: Clear channel (Default) (Slaves: 05)
> Channel 06: Clear channel (Default) (Slaves: 06)
> Channel 07: Clear channel (Default) (Slaves: 07)
> Channel 08: Clear channel (Default) (Slaves: 08)
> Channel 09: Clear channel (Default) (Slaves: 09)
> Channel 10: Clear channel (Default) (Slaves: 10)
> Channel 11: Clear channel (Default) (Slaves: 11)
> Channel 12: Clear channel (Default) (Slaves: 12)
> Channel 13: Clear channel (Default) (Slaves: 13)
> Channel 14: Clear channel (Default) (Slaves: 14)
> Channel 15: Clear channel (Default) (Slaves: 15)
> Channel 16: D-channel (Default) (Slaves: 16)
> Channel 17: Clear channel (Default) (Slaves: 17)
> Channel 18: Clear channel (Default) (Slaves: 18)
> Channel 19: Clear channel (Default) (Slaves: 19)
> Channel 20: Clear channel (Default) (Slaves: 20)
> Channel 21: Clear channel (Default) (Slaves: 21)
> Channel 22: Clear channel (Default) (Slaves: 22)
> Channel 23: Clear channel (Default) (Slaves: 23)
> Channel 24: Clear channel (Default) (Slaves: 24)
> Channel 25: Clear channel (Default) (Slaves: 25)
> Channel 26: Clear channel (Default) (Slaves: 26)
> Channel 27: Clear channel (Default) (Slaves: 27)
> Channel 28: Clear channel (Default) (Slaves: 28)
> Channel 29: Clear channel (Default) (Slaves: 29)
> Channel 30: Clear channel (Default) (Slaves: 30)
> Channel 31: Clear channel (Default) (Slaves: 31)
>
> 31 channels configured.
>
> Changing signalling on channel 1 from Unused to Clear
> channel
> Changing signalling on channel 2 from Unused to Clear
> channel
> Changing signalling on channel 3 from Unused to Clear
> channel
> Changing signalling on channel 4 from Unused to Clear
> channel
> Changing signalling on channel 5 from Unused to Clear
> channel
> Changing signalling on channel 6 from Unused to Clear
> channel
> Changing signalling on channel 7 from Unused to Clear
> channel
> Changing signalling on channel 8 from Unused to Clear
> channel
> Changing signalling on channel 9 from Unused to Clear
> channel
> Changing signalling on channel 10 from Unused to Clear
> channel
> Changing signalling on channel 11 from Unused to Clear
> channel
> Changing signalling on channel 12 from Unused to Clear
> channel
> Changing signalling on channel 13 from Unused to Clear
> channel
> Changing signalling on channel 14 from Unused to Clear
> channel
> Changing signalling on channel 15 from Unused to Clear
> channel
> Changing signalling on channel 16 from Unused to HDLC
> with FCS check
> Changing signalling on channel 17 from Unused to Clear
> channel
> Changing signalling on channel 18 from Unused to Clear
> channel
> Changing signalling on channel 19 from Unused to Clear
> channel
> Changing signalling on channel 20 from Unused to Clear
> channel
> Changing signalling on channel 21 from Unused to Clear
> channel
> Changing signalling on channel 22 from Unused to Clear
> channel
> Changing signalling on channel 23 from Unused to Clear
> channel
> Changing signalling on channel 24 from Unused to Clear
> channel
> Changing signalling on channel 25 from Unused to Clear
> channel
> Changing signalling on channel 26 from Unused to Clear
> channel
> Changing signalling on channel 27 from Unused to Clear
> channel
> Changing signalling on channel 28 from Unused to Clear
> channel
> Changing signalling on channel 29 from Unused to Clear
> channel
> Changing signalling on channel 30 from Unused to Clear
> channel
> Changing signalling on channel 31 from Unused to Clear
> channel
>
> I guess I'll have trouble getting all three cards to
> work together on the same box.
>
>
>
>  
> ____________________________________________________________________________________
> Sucker-punch spam with award-winning protection. 
> Try the free Yahoo! Mail Beta.
> http://advision.webevents.yahoo.com/mailbeta/features_spam.html
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>