[asterisk-users] CAS signalling conflicts with Clear channel

[David Gomillion]

On 5/21/07, Vieri <rentorbuy at yahoo.com> wrote:
>
> Hi,
>
> My asterisk server was working with a 4-FXO analog
> card (TDM400P).
>
> I recently added two digital cards: a TE120P (1 PRI)
> and a B410P (4 BRI).
>
> The B410P is still unconfigured but inserted in a PCI
> slot.
>
> The TE120P's jumper is set to E1 as it will connect to
> a commercial PBX's PRI card also configured as E1.
>
> My analog channels used to be 1-4 but since I added
> the new cards I changed them to 101-104.


I could be wrong here, but I don't think you get to arbitrarily make up what
the channel numbers. At least I've never done that; I let the first channel
be 1, second one 2, etc, through all of the cards, based on loading order of
the PCI cards. And are you sure about the loading order of the cards?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070521/2afccf6c/attachment.htm