[asterisk-users] TE212P octastic initialization failure

[Matthew Fredrickson]

On May 19, 2007, at 5:17 PM, Deepak Naidu wrote:

> I think the best way is to conact Digium Hardware support. it seems 
> there may be an IRQ problem.

No, that doesn't have anything to do with IRQ problems.  It looks like 
it's another problem.

Matthew Fredrickson

>  
> --
> Deepak
>
> Francois Deppierraz <francois at ctrlaltdel.ch> wrote:
>> Hi,
>>
>> I'm trying to get a TE212 working on a Dell PowerEdge 1850 running
>> Debian etch using the latest release of libpri (1.4.0), zaptel 
>> (1.4.2.1)
>> and asterisk (1.4.4). The initilization of the Octasic echo canceller
>> seems to fail when the wct4xxp module is loaded.
>>
>> [...]
>> VPM450: echo cancellation for 64 channels
>> Failed to open chip, code 00103017!
>> VPM450: Failed to initialize
>> [...]
>>
>> By looking in the zaptel code, this error value (0x00103017) means
>> cOCT6100_ERR_OPEN_EXTERNAL_MEM_BIST_FAILED.
>>
>> Is anyone familiar with that problem ?
>>
>> Thanks for your help.
>>
>>
>>
>>
>> ---
>> TE212P card: jumpers are set to E1 mode and nothing is connected to 
>> that
>> card at the moment.
>>
>>
>> # uname -a
>> Linux ditti-voipa-serv-1 2.6.18-4-amd64 #1 SMP Fri May 4 00:37:33 UTC
>> 2007 x86_64 GNU/Linux
>> # cat /etc/zaptel.conf
>> span=1,1,0,ccs,hdb3,crc4
>> bchan=1-15
>> dchan=16
>> bchan=17-31
>>
>> span=2,1,0,ccs,hdb3,crc4
>> bchan=32-46
>> dchan=47
>> bchan=48-62
>> # cat /proc/interrupts
>> CPU0 CPU1
>> 0: 42385 0 IO-APIC-edge timer
>> 6: 3 0 IO-APIC-edge floppy
>> 8: 1 0 IO-APIC-edge rtc
>> 9: 0 0 IO-APIC-level acpi
>> 14: 64 0 IO-APIC-edge ide0
>> 169: 0 0 IO-APIC-level uhci_hcd:usb1
>> 177: 0 0 IO-APIC-level uhci_hcd:usb2
>> 185: 0 0 IO-APIC-level uhci_hcd:usb3
>> 193: 19 0 IO-APIC-level ehci_hcd:usb4
>> 201: 2148 0 IO-APIC-level ioc0
>> 217: 1153 0 IO-APIC-level eth1
>> 225: 160247 0 IO-APIC-level wct2xxp
>> NMI: 64 42
>> LOC: 42340 42317
>> ERR: 0
>> MIS: 0
>>
>> # dmesg
>> [...]
>> Found TE2XXP at base address fe7ffc00, remapped to ffffc20000004c00
>> TE2XXP version c01a016a, burst OFF, slip debug: OFF
>> Octasic optimized!
>> FALC version: 00000005, Board ID: 00
>> Reg 0: 0x7daa5400
>> Reg 1: 0x7daa5000
>> Reg 2: 0xffffffff
>> Reg 3: 0x00000000
>> Reg 4: 0x00000101
>> Reg 5: 0x00000000
>> Reg 6: 0xc01a016a
>> Reg 7: 0x00001300
>> Reg 8: 0x00000000
>> Reg 9: 0x00ff0001
>> Reg 10: 0x0000004a
>> TE2XXP: Launching card: 0
>> TE2XXP: Setting up global serial parameters
>> Found a Wildcard: Wildcard TE210P (3rd Gen)
>> About to enter spanconfig!
>> Done with spanconfig!
>> About to enter spanconfig!
>> Done with spanconfig!
>> About to enter startup!
>> TE2XXP: Span 1 configured for CCS/HDB3/CRC4
>> wct2xxp: Setting yellow alarm on span 1
>> timing source auto card 0!
>> VPM400: Not Present
>> VPM450: echo cancellation for 64 channels
>> Failed to open chip, code 00103017!
>> VPM450: Failed to initialize
>> Completed startup!
>> About to enter startup!
>> TE2XXP: Span 2 configured for CCS/HDB3/CRC4
>> wct2xxp: Setting yellow alarm on span 2
>> timing source auto card 0!
>> SPAN 2: Primary Sync Source
>> VPM400: Not Present
>> Failed to get chip capacity, code 0010305e!
>> Unsupported channel capacity found on VPM module (0).
>> Completed startup!
>> [...]
>> # ztcfg -v
>>
>> Zaptel Version: 1.4.2.1
>> Echo Canceller: MG2
>> Configuration
>> ======================
>>
>> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>
>> 62 channels configured.
>>
>> #
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  New Yahoo! Mail is the ultimate force in competitive emailing. Find 
> out more at the Yahoo! Mail Championships. Plus: play games and win 
> prizes._______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users