[asterisk-users] xten will not send tones to * and i from sip phone

[pedro noticioso]

hi there!

I have a couple phones connected to a sipura ata and
if I go into *- IVR, I press options on the regular
phones and it all works fine and dandy.

then I connect an xten softphone, a new extension in
my dialplan, I dial the ivr, * asks me to dial
something to go through it, I press keys on xten, but
nothing happens, * just times out through as if I did
not press anything!

is there some sort of configuration out there to tell
the xten softphone to work as expected? thanks!

Then another problem!

I used the i extension, plus _X and _X. to make sure I
catch everything that is not propperly dialed.

If I take the regular phones that are connected
through the sipura ata, then dial 'exten =>
700,1,Goto(default,s,1)' so that I get the asking for
an extension to reach, I dial a wrong number and
walla, its caight by one of my magic numbers!

BUT, if I pickup the same phone, and just dial the
same wrong number? I just get a busy signal! and there
is nothing registered at the CLI even though I added
DEBIG to the configuration! :s

What can I do to make sure I always send an error
sound and never again a busy signal?


thanks!






 
____________________________________________________________________________________
Bored stiff? Loosen up... 
Download and play hundreds of games for free on Yahoo! Games.
http://games.yahoo.com/games/front