[asterisk-users] OT (semi) E60 problem

[Tim Panton]

On 14 May 2007, at 17:50, Martin Joseph wrote:

> Hello again gurus.
>
> I have been using Asterisk with great results going on a couple of  
> years now.
>
> My primary box is running asterisk 1.42 built from a tar ball on  
> Mac OSX 10.4.9.
>
> I have a very odd issue that I cannot seem to nail down, which is  
> related to my Nokia E60 SIP phone.
>
> I use the E60 with very good results (latest firmware) from several  
> locations.
>
> Basically it works fine from everywhere EXCEPT when it's on the  
> same LAN as my asterisk box.
>
> The SIP config. that I have setup for the LAN connection refers to  
> my asterisk box by it's local IP (ie 192.168.1.101).  The external  
> configs refer to the asterisk box by it's name (ie sip.domain.com).
>
> It seems like this has something to do with the authentication  
> realm?  If I  create a new config on the phone using the LAN  
> address, it works, but then when I leave the LAN, it appears to  
> register,  but issues a "connection error" when I try to place calls.
>
> To get it working again from outside the LAN,  I can change the  
> realm parameter in SIP.conf, and then reload and then change it  
> AGAIN back to it's original value and reload, the phone then works  
> fine.   At that point, the LAN based config won't work anymore and  
> will give me a "connection error".
>
> Any thoughts on this?  Ideas on how to troubleshoot further or work  
> around it would be great.

I had a similar problem, and it turned out to be capitalization error.
The font the nokia uses for it's config dialogs is such that the caps  
don't stand out.
This was compounded by the fact that the default input method  
capitalizes the first letter of every line.

I guess this isn't your problem, but if it is I've saved you a _long_  
tedious hunt!


Tim Panton

www.mexuar.net
www.westhawk.co.uk/