[asterisk-users] A couple of questions for the Mitelgurus(phone-related - not systems)

[Nigel Kendrick]

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Barry Porch
Sent: Friday, May 11, 2007 8:44 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] A couple of questions for the
Mitelgurus(phone-related - not systems)

Nigel,

You cannot upgrade a non-dual mode 5220 to SIP.  

If you are referring to the cable that connects the 5310 to a 5235, that
is a standard CAT5 straight-through cable.

Barry

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Nigel
Kendrick
Sent: Friday, May 11, 2007 7:27 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] A couple of questions for the Mitel
gurus(phone-related - not systems)

Hi Folks,

Just in case there are any Mitel gurus here:

1) Is it possible to convince a non-dual mode 5220 phone to 'upgrade' to
the
SIP firmware? I have inherited one that's Minet only.

2) I have a 5310 conference unit and 5235 phone in SIP mode, but
someone's
lost the connecting lead. Can anyone recommend anywhere in the UK for a
replacement lead or confirm the pin-out so I can check whether a generic
RJ-RJ lead will work without frying anything.

Thanks

Nigel Kendrick




Thanks Barry,

I managed to find some specs for the 5310 and when it mentioned that it was
PoE powered I took the plunge and tried a cat 5 patch lead and everything's
working fine.

Shame about the 5220 - but no big loss.

Nigel