[asterisk-users] Cutted audio or 2/3s blanks on EuroISDN
- Asterisk1.4
Administrator TOOTAI
admin at tootai.net
Fri May 11 01:46:32 MST 2007
Steve Totaro a écrit :
Hi Steve
> Your Zap conf files would be helpful. Zttest results? Cat
> /proc/interrupts. Sharing interrupts?
No. Zap con files should not be relevant as we are using ISDN.
dh at SrvP:/home/asterisk/1.4/zaptel$ cat /etc/zaptel.conf
loadzone = us
defaultzone=us
dh at SrvP:/home/asterisk/1.4/zaptel$ cat /etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
;
; You need to restart Asterisk to re-configure the Zap channel
; CLI> reload chan_zap.so
; will reload the configuration file,
; but not all configuration options are
; re-configured during a reload.
[trunkgroups]
[channels]
;
context=default
;
switchtype=national
;
signalling=fxo_ls
;
rxwink=300 ; Atlas seems to use long (250ms) winks
;
usecallerid=yes
;
hidecallerid=no
;
callwaiting=yes
;
usecallingpres=yes
;
callwaitingcallerid=yes
;
threewaycalling=yes
;
transfer=yes
;
canpark=yes
;
cancallforward=yes
;
callreturn=yes
;
echocancel=yes
;
echocancelwhenbridged=yes
;
rxgain=0.0
txgain=0.0
;
group=1
; make these both the same. Groups range from 0 to 63.
;
callgroup=1
pickupgroup=1
;
immediate=no
dh at SrvP:/home/asterisk/1.4/zaptel$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 109917508 0 0 0 IO-APIC-edge timer
1: 12365 0 0 0 IO-APIC-edge i8042
8: 444560118 0 0 0 IO-APIC-edge rtc
9: 0 0 0 0 IO-APIC-level acpi
12: 11367 0 0 0 IO-APIC-edge i8042
14: 3944731 0 0 0 IO-APIC-edge ide0
58: 0 0 0 0 IO-APIC-level
uhci_hcd:usb1, uhci_hcd:usb3, ehci_hcd:usb5
66: 0 0 0 0 IO-APIC-level
uhci_hcd:usb2, uhci_hcd:usb4
74: 4552211 0 0 0 IO-APIC-level libata
90: 18418187 0 0 0 PCI-MSI eth0
98: 27358592 0 0 0 IO-APIC-level HFC-multi
106: 27358571 0 0 0 IO-APIC-level HFC-multi
NMI: 14333 691 827 1273
LOC: 109917988 109917975 109917950 109917910
ERR: 0
MIS: 0
We use ztdummy for Meetme:
dh at SrvP:/home/asterisk/1.4/zaptel$ sudo ./zttest
Opened pseudo zap interface, measuring accuracy...
99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965%
99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.951172%
99.938965% 99.963379%
99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965%
99.963379% 99.963379%
99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379%
99.963379% 99.938965%
99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379%
99.938965% 99.963379%
99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965%
99.963379% 99.938965%
99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379%
99.938965% 99.951172%
99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965%
99.963379% 99.963379%
99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379%
99.963379% 99.938965%
99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379%
99.938965% 99.963379%
99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965%
99.963379% 99.938965%
--- Results after 87 passes ---
Best: 99.963379 -- Worst: 99.938965 -- Average: 99.952721
lsmod, zttranscode was loaded, I remove it:
dh at SrvPhone:/home/asterisk/1.4/zaptel$ lsmod
Module Size Used by
ztdummy 10056 0
tcp_diag 6400 0
inet_diag 16784 1 tcp_diag
mISDN_dsp 201384 1
hfcmulti 79884 1
mISDN_capi 107116 1
l3udss1 46744 1
mISDN_l2 44616 1
mISDN_l1 17560 1
mISDN_core 88224 6
mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1
capi 23616 0
capifs 11152 2 capi
kernelcapi 56640 2 mISDN_capi,capi
zaptel 197608 7 ztdummy
crc_ccitt 6784 1 zaptel
ipv6 285664 34
ppdev 14088 0
parport_pc 41640 0
lp 17736 0
parport 44684 3 ppdev,parport_pc,lp
button 12192 0
ac 10376 0
battery 15496 0
dm_snapshot 20664 0
dm_mirror 25216 0
dm_mod 62800 2 dm_snapshot,dm_mirror
loop 20112 0
tsdev 13056 0
i2c_i801 13076 0
serio_raw 12036 0
i2c_core 27776 1 i2c_i801
pcspkr 7808 0
psmouse 44432 0
shpchp 42156 0
pci_hotplug 20872 1 shpchp
evdev 15360 1
ext3 138512 3
jbd 65392 1 ext3
mbcache 14216 1 ext3
raid1 27008 4
md_mod 82844 5 raid1
ide_generic 5760 0 [permanent]
ide_cd 45088 0
cdrom 40488 1 ide_cd
generic 11396 0 [permanent]
sd_mod 25856 10
ahci 24708 8
libata 106784 1 ahci
scsi_mod 153008 3 sd_mod,ahci,libata
piix 15492 0 [permanent]
ide_core 147584 4 ide_generic,ide_cd,generic,piix
ehci_hcd 36104 0
e1000 123968 0
uhci_hcd 28696 0
thermal 20240 0
processor 38248 1 thermal
fan 9864 0
>
> Any funky error in the logs?
Nothing.
Thanks for your help.
>
>
>> -----Original Message-----
>> [...]
>> Morning all,
>>
>> we face a strange problem on a dual Xeon server with 2 GB RAM and 2
>> B410P cards. On ISDN calls, audio is sometimes poor (micro
>> cutted/scratched) even cutted during few seconds (2 or 3). Problem
>> appears only on some calls and isn't reproducable.
>>
>> Kernel is a Debian/Etch 2.6.17-4 amd64. We are using misdn1.1.2 with:
>>
>> Asterisk SVN-branch-1.4-r62218 built by root @ SrvPhone on a x86_64
>> running Linux on 2007-05-05 13:42:13 UTC
>>
>> Cards are setted in TE-PTP mode, 7 of the 8 ports are used. Telco is
>> Belgacom - Belgium. They checked lines and tell they are ok.
>>
>> Thanks for any hint.
>>
>> --
>> Daniel
More information about the asterisk-users
mailing list