[asterisk-users] Problem with the loading of the cards in Debian

MCelo mcelooliveira at gmail.com
Tue May 8 15:49:12 MST 2007


Cohen,

Thanks for your help, but I solved this problem removing the ACPI and
APIC from the boot in /boot/grub/menu.lst.

Thanks,

MCelo.


2007/5/8, Tzafrir Cohen <tzafrir.cohen at xorcom.com>:
> On Mon, May 07, 2007 at 05:15:26PM -0300, MCelo wrote:
> > Cohen,
> >
> > >On different boots you get the modules loaded with a different order?
> > >
> >
> > Yes, thats it.
> >
> > >What do you have in /etc/modules ? This should take effect on boot.
> >
> > I have the following in /etc/modules :
> >
> > asterisk:~# cat /etc/modules
> > # /etc/modules: kernel modules to load at boot time.
> > #
> > # This file contains the names of kernel modules that should be loaded
> > # at boot time, one per line. Lines beginning with "#" are ignored.
> >
> > zaptel
>
> You don't really need zaptel here. It will get loaded by a modprobe of
> any of the other.
>
> > wcte11xp
> > wctdm
> > wcfxo
>
> OK.
>
> > loop
> >
> >
> >
> > This is the order that I want. I don't know what loop means.
> >
> > >What do you have in /etc/sysconfig/zaptel ? This should take efect if
> > >you unloaded all modules and want to reload them.
> > >
> >
> > I don't have the file /etc/sysconfig/zaptel, but I have
> > /etc/default/zaptel.
>
> Right. My mistake.
>
> > Where I can find some information about the
> > loading modules. In this file I un-commented  the modules that I want,
> > and I left commented the modules that I don't want. I have the
> > following in /etc/default/zaptel :
> >
> > asterisk:~# cat /etc/default/zaptel
> > TELEPHONY=yes
> > #DEBUG=yes
> >
>
> Removing remmed-out lines:
>
> > MODULES="$MODULES wcte11xp"     # TE110P - Single Span T1/E1 Card
> > MODULES="$MODULES wcfxo"        # X100P - Single port FXO interface
> > MODULES="$MODULES wctdm"        # TDM400P - Modular FXS/FXO interface
>
> So you basically have:
>
> MODULES="$MODULES wct1xxp wcfxo wctdm"
>
> Also note that you don't initialize MODULES . I believe
> /etc/init.d/zaptel has a default value for it.
>
> grep MODULES= /etc/init.d/zaptel
>
> --
>               Tzafrir Cohen
> icq#16849755                    jabber:tzafrir at jabber.org
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


More information about the asterisk-users mailing list