[asterisk-users] T1/E1 Configuration

[Nitesh Divecha]

Thanks Guys...

Got the T1/E1 Card working... Digium Engineers helped... According to 
them TE405P card must load first and then the analog TDM400P.

Other thing which I messed up was that I changed the configuration to T1 
but forgot to remove the Jumpers from the TE405P card. So that was 
causing Asterisk to fail...

Its working now but can anyone clarify that... Do I have to remove all 
four jumpers to make T1 card?

Anyone can help me with this error?

May  4 10:41:10 WARNING[5171]: chan_zap.c:9134 pri_dchannel: PRI Error: 
We think we're the CPE, but they think they're the CPE too.


Regards,
Nitesh



Tzafrir Cohen wrote:
> On Thu, May 03, 2007 at 11:03:59PM -0400, Nitesh Divecha wrote:
>   
>> Hello All,
>>
>> Can anyone please post their working T1/E1 configuration...
>>
>> Both '/etc/zaptel.conf' and '/etc/asterisk/zapata.conf'. I believe if 
>> you run 'genzaptelconf' it created '/etc/asterisk/zapata-channels.conf', 
>> so please post that one also.
>>     
>
> What do you have in /etc/asterisk/zapata.conf ?
>
>   
>> Here is my configuration which is failing Asterisk to load... I have two 
>> cards TE405P and TDM400P: -
>>     
>
> What error message do you get from asterisk at load time? You'll
> typically see them in /var/log/asterisk/messages or
> /var/log/asterisk/full
>
>   
>> ===========
>> /etc/zaptel.conf
>> ===========
>> # T1 Configuration
>> span=1,1,0,esf,b8zs
>> bchan=1-23
>> dchan=24
>>
>> span=2,1,0,esf,b8zs
>> bchan=25-47
>> dchan=48
>>
>> span=3,1,0,esf,b8zs
>> bchan=49-71
>> dchan=72
>>
>> span=4,1,0,esf,b8zs
>> bchan=73-95
>> dchan=96
>>
>> fxsks=97
>> fxsks=98
>> fxsks=99
>> fxsks=100
>>
>> # Global data
>>
>> loadzone        = us
>> defaultzone     = us
>>
>> ========================
>> /etc/asterisk/zapata-channels.conf
>> ========================
>> group = 1
>> switchtype = national
>> signalling = pri_cpe
>> context = from-zaptel
>> channel => 1-23
>>
>> group = 2
>> switchtype = national
>> signalling = pri_cpe
>> context = from-zaptel
>> channel => 25-47
>>
>> group = 3
>> switchtype = national
>> signalling = pri_cpe
>> context = from-zaptel
>> channel => 49-71
>>
>> group = 4
>> switchtype = national
>> signalling = pri_cpe
>> context = from-zaptel
>> channel => 73-95
>>
>> signalling=fxs_ks
>> callerid=asreceived
>> group=0
>> context=from-zaptel
>> channel => 97
>> ; context=default
>>
>> signalling=fxs_ks
>> callerid=asreceived
>> group=0
>> context=from-pstn
>> channel => 98
>> context=default
>>
>> signalling=fxs_ks
>> callerid=asreceived
>> group=0
>> context=from-pstn
>> channel => 99
>> context=default
>>
>> signalling=fxs_ks
>> callerid=asreceived
>> group=0
>> context=from-pstn
>> channel => 100
>> context=default
>>
>>
>> Thanking in advance...
>>
>> Cheers,
>> Nitesh
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>     
>
>