[asterisk-users] Calls in ulaw, not gsm as desired

[Rob Schall]

That's what I did though. So my sip.conf file no longer has any "allows"
in it. Instead, it should be relying on the realtime settings for that.
However, even though I told it to only use 5053, it still is using ulaw.

Rob

Salvatore Giudice wrote:
>
> Yeah that is fine. You don't need to do any more than that.
>
>  
>
> --------------------------------------------------
> Salvatore Giudice
> Salvatore.Giudice at VoIPSecurityTraining.com
>
> VoIP Security Training, LLC
> http://VoIPSecurityTraining.com
>
> 848 N. Rainbow Blvd. #1676
> Las Vegas, NV 89107
> Phone: (617) 959-7625
> Fax: (214) 279-2906
>
>  
>
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Rob Schall
> *Sent:* Tuesday, May 01, 2007 2:06 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Calls in ulaw, not gsm as desired
>
>  
>
> I was in the asterisk console and I typed "reload". Is this not enough
> to reload the sip.conf file?
>
> Rob
>
> Andreas Sikkema wrote:
>
>     However, even once I reloaded the extensions, its still only 
>
>     using ulaw.
>
>         
>
>  
> You didn't reload the sip config? Maybe that's your problem?
>  
>   
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070501/5c18a496/attachment.htm