[asterisk-users] TDM400P and TE405P

[Nitesh Divecha]

Dave Miller wrote:
> Nitesh Divecha wrote on 5/1/07 10:28 AM:
>
>   
>> Is it possible to have both Digium cards installed on one Server
>> (TDM400P and TE405P)?
>>
>> I have one site which requires both connection POT and T1/E1.
>>
>> How can I configure both cards?
>>     
>
> Should work just fine.  The Zaptel drivers will pick up both.  Just be
> forewarned, the T1/E1 channels will all get numbered before the POTS
> channels, no matter what order they're on the bus, so 1-24 will be your
> T1 and 25-28 the POTS, for example.  (I think E1 goes to 32?)
>
>   
Thanks Dave,

 From the Asterisk CLI when I do "zap show status", I get: -

hyperion*CLI> zap show status
Description                              Alarms     IRQ        
bpviol     CRC4     
Wildcard TDM400P REV I Board 1           OK         0          
0          0        
T4XXP (PCI) Card 0 Span 1                OK         0          
0          0        
T4XXP (PCI) Card 0 Span 2                OK         0          
0          0        
T4XXP (PCI) Card 0 Span 3                OK         0          
0          0        
T4XXP (PCI) Card 0 Span 4                OK         0          
0          0        
hyperion*CLI>


Back of the cards I see four green lights on TDM400P, but no lights on 
TE405P... And right now I tried calling in on POT lines and Asterisk is 
not picking up the call...

Am I missing something here...?

Regards,
Nitesh