[asterisk-users] Ring/Off-hook in strange state 6

[Alex Mcdowell]

Digium says it is a problem with the telco line. And of course telco
says problem is internal.  I am going to call them back tomorrow and
make sure that disconnect supervision is enabled.

On 6/26/07, Alex Mcdowell <mcdowell.alex at gmail.com> wrote:
> I don't have caller ID at all, not on the verizon side and
> usecallerid=no in zapata.conf. I do, however have the DSL on this
> line. I have a splitter and then I have a filter on the asterisk side.
> I am guessing this is the root of the problem. Thanks for any
> insight.-Alex
>
> On 6/26/07, Eric ManxPower Wieling <eric at fnords.org> wrote:
> > Daniel already pointed you in the right direction.
> >
> > I have seen this error many times, but it never causes a problem.
> >
> > Alex Mcdowell wrote:
> > > Can anybody at least point me in a direction??
> > >
> > > On 6/25/07, Alex Mcdowell <mcdowell.alex at gmail.com> wrote:
> > >> I don't think my cards are bad, but maybe there is a problem with the
> > >> one. It has been two weeks since I put my ticket in with Digium...and
> > >> still no word. I am starting to get frustrated.
> > >>
> > >> On 6/22/07, Daniel Hazelbaker <daniel at highdesertchurch.com> wrote:
> > >>>
> > >>> Alex,
> > >>>
> > >>>
> > >>>       I had this problem with a new TDM2400 card that we purchased.  Specifically I would get that message and then it would pick up the ringing line AND the line next to it.  Basically, lines 1 & 2 had been cross-linked somehow.  After a few weeks of trouble-shooting with Digium tech support they cross-shipped me a new card and the problem (and that message) went away.
> > >>>
> > >>>
> > >>> Daniel Hazelbaker
> > >>> High Desert Church
> > >>>
> > >>>
> > >>>
> > >>> On Jun 22, 2007, at 1:22 PM, Alex Mcdowell wrote:
> > >>>
> > >>>
> > >>>
> > >>> HI I have two servers both of which get this message on one of the lines.
> > >>>
> > >>> Ring/Off-hook in strange state 6. The one server seems to be ok with it, but
> > >>>
> > >>> the other one when an extension picks up there is no one there and the
> > >>>
> > >>> incoming call keeps ringing. I tried to adjust the levels in wcfxo.c like
> > >>>
> > >>> someone had suggested, but it didn't do anything. I also upgraded zaptel to
> > >>>
> > >>> the latest. 1.2.18 and asterisk is running at 1.2.14. callprogess is set to
> > >>>
> > >>> no, as well as busydetect=no. This is a major problem since this box only
> > >>>
> > >>> has 1 other line, but at least it works. I can't seem to find much info on
> > >>>
> > >>> this issue. I can't believe others haven't run into it.  I started a ticket
> > >>>
> > >>> with digium, but I guess they are pretty backed up. Here is what I am
> > >>>
> > >>> getting in the CLI:  Thanks for any help -Alex
> > >>>
> > >>>     -- Starting simple switch on 'Zap/4-1'
> > >>>
> > >>>     -- Executing Wait("Zap/4-1", "1") in new stack
> > >>>
> > >>>     -- Executing Answer("Zap/4-1", "") in new stack
> > >>>
> > >>>     -- Executing Dial("Zap/4-1", "SIP/4125|20|tr") in new stack
> > >>>
> > >>>     -- Called 4125
> > >>>
> > >>> Jun 22 13:44:45 WARNING[24296]: chan_zap.c:3926 zt_handle_event:
> > >>>
> > >>> Ring/Off-hook in strange state 6 on channel 4
> > >>>
> > >>>     -- SIP/4125-09559118 is ringing
> > >>>
> > >>> Jun 22 13:44:46 WARNING[24296]: chan_zap.c:3926 zt_handle_event:
> > >>>
> > >>> Ring/Off-hook in strange state 6 on channel 4
> > >>>
> > >>>     -- SIP/4125-09559118 answered Zap/4-1
> > >>>
> > >>>   == Spawn extension (incoming, s, 3) exited non-zero on 'Zap/4-1'
> > >>>
> > >>>     -- Hungup 'Zap/4-1'
> > >>>
> > >>>     -- Starting simple switch on 'Zap/4-1'
> > >>>
> > >>>     -- Executing Wait("Zap/4-1", "1") in new stack
> > >>>
> > >>>     -- Executing Answer("Zap/4-1", "") in new stack
> > >>>
> > >>>     -- Executing Dial("Zap/4-1", "SIP/4125|20|tr") in new stack
> > >>>
> > >>>     -- Called 4125
> > >>>
> > >>> Jun 22 13:44:57 WARNING[24303]: chan_zap.c:3926 zt_handle_event:
> > >>>
> > >>> Ring/Off-hook in strange state 6 on channel 4
> > >>>
> > >>>     -- SIP/4125-09559118 is ringing
> > >>>
> > >>> Jun 22 13:44:58 WARNING[24303]: chan_zap.c:3926 zt_handle_event:
> > >>>
> > >>> Ring/Off-hook in strange state 6 on channel 4
> > >>>
> > >>>     -- SIP/4125-09559118 answered Zap/4-1
> > >>>
> > >>>   == Spawn extension (incoming, s, 3) exited non-zero on 'Zap/4-1'
> > >>>
> > >>>     -- Hungup 'Zap/4-1'
> > >>>
> > >>>     -- Starting simple switch on 'Zap/4-1'
> > >>>
> > >>>     -- Executing Wait("Zap/4-1", "1") in new stack
> > >>>
> > >>>     -- Executing Answer("Zap/4-1", "") in new stack
> > >>>
> > >>>     -- Executing Dial("Zap/4-1", "SIP/4125|20|tr") in new stack
> > >>>
> > >>>     -- Called 4125
> > >>>
> > >>>     -- SIP/4125-09559118 is ringing
> > >>>
> > >>> _______________________________________________
> > >>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >>>
> > >>> asterisk-users mailing list
> > >>> To UNSUBSCRIBE or update options visit:
> > >>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >>>
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>