[asterisk-users] TDM400 one way calls

[randulo]

What phone are you trying to dial? (ZAP/1?)
What is the CLI output when you dial?
What number are you dialing? 601?

On 6/21/07, Matt Scott <matt at mgsnet.co.uk> wrote:
>
>
>
>
> Dear All
>
> I have a problem with a TDM400 card with 4 x FXS modules.
> The card carries extensions only and there are no incoming lines.
>
> I can make a call to the extension on this card with no problems.
> However, when I try and call a different extension I just get a busy signal.
>
>
> I also get an error message (as shown at the bottom). Is this a problem?
>
> Configs below:
>
> [root at asterisk etc]# more zaptel.conf
> fxoks=1-4
> loadzone=uk
> defaultzone=uk
>
> [root at asterisk asterisk]# more zapata.conf
> [trunkgroups]
> ;define trunks here
>
> [channels]
> usecallerid=yes
> hidecallerid=no
> callwaiting=no
> threewaycalling=yes
> transfer=yes
> echocancel=yes
> echotraining=yes
> immediate=no
>
> ;define channels
> context=dialphone
> signalling=fxo_ks
> cidsignalling=v23 ; Added for UK CLI detection
> cidstart=polarity
> usecallerid=yes
> channel => 1-4
>
>
> [root at asterisk asterisk]# more extensions.conf
> [general]
> static=yes
> writeprotect=yes
> ;
> [globals]
> FAX1 = Zap/1
> FAX2 = Zap/2
> STREAMLINE1 = Zap/3
> STREAMLINE2 = Zap/4
> CUSTSERVE1 = SIP/401 ;Teresa
> CUSTSERVE2 = SIP/402 ; Louise
> ;CUSTSERVE3 = SIP/404 ; Helen
> QUAD1 = SIP/451 ; Matt
> QUAD2 = SIP/452 ; Johan
> CUSTSERVE = CUSTSERVE1&CUSTSERVE1
> ;
> FSEXT1 = SIP/400 ; Angela
> ;FSEXT2 = SIP/403 ; Nigel
> FSEXT3 = SIP/410 ; Matt
> ;
> ;ELLIS = SIP/411
> ;QUEENS = SIP/412
> ;FSSHOPS = ELLIS&QUEENS
> ;
> QUAD = SIP/450
> ;
> LONDONSOLE1 = SIP/421 ; Zoe
> ;LONDONSOLE2 = SIP/422 ; Laura
> ;LONDONSOLE = LONDONSOLE1&LONDONSOLE2
> ;
> ;PRESS1 = SIP/431 ; Lucy
> ;PRESS2 = SIP/432 ; Gemma
> ;PRESSOFFICE = PRESS1&PRESS2
> ;
> [macro-oneline]
> exten => s,1,Dial(${ARG1},20,t)
> exten => s,2,Voicemail(u${MACRO_EXTEN})
> exten => s,3,Hangup
> exten => s,102,Voicemail(b${MACRO_EXTEN})
> exten => s,103,Hangup
> ;
> [macro-oneline1]
> exten => s,1,Dial(${ARG1},20,t)
> exten => s,2,Voicemail(u${ARG2})
> exten => s,3,Hangup
> exten => s,102,Voicemail(b${ARG2})
> exten => s,103,Hangup
> ;
> ;
> [default]
> ;setupdial out
> ;
> ;test dialplan
> exten => _9xxx,1,SayDigits(${EXTEN:1})
> ;
> ;setup the phone extensions
> exten => 400,1,Macro(oneline,${FSEXT1})
> exten => 401,1,Macro(oneline,${CUSTSERVE1})
> exten => 402,1,Macro(oneline,${CUSTSERVE2})
> exten => 410,1,Macro(oneline,${FSEXT3})
> exten => 421,1,Macro(oneline,${LONDONSOLE1})
> exten => 450,1,Macro(oneline,${QUAD})
> exten => 451,1,Macro(oneline,${QUAD1})
> exten => 452,1,Macro(oneline,${QUAD2})
> ;
> exten => 1000,1,Macro(oneline,${CUSTSERVE})
> ;exten => 2000,1,Macro(oneline,${FSSHOPS})
> ;exten => 3000,1,Macro(oneline,${PRESSOFFICE})
> ;
> [dialphone]
> exten => 601,1,Macro(oneline,${FAX1})
> ;
>
>
> asterisk*CLI> reload chan_zap.so
>     -- Reloading module 'chan_zap.so' (Zapata Telephony)
>   == Parsing '/etc/asterisk/zapata.conf': Found
> [Jun 21 10:24:26] WARNING[29786]: chan_zap.c:11072 process_zap: Ignoring
> signalling
>     -- Reconfigured channel 1, FXO Kewlstart signalling
>     -- Reconfigured channel 2, FXO Kewlstart signalling
>     -- Reconfigured channel 3, FXO Kewlstart signalling
>     -- Reconfigured channel 4, FXO Kewlstart signalling
>   == Parsing '/etc/asterisk/users.conf': Found
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>