[asterisk-users] chan problem

[Tzafrir Cohen]

On Mon, Jun 18, 2007 at 12:50:23PM +0200, Josu Lazkano wrote:
> Hello everybody!
> 
> I have some problems with my Astersk. I have an analogical OpenVox card and
> A Billion ISDN card (with mISDN).
> 
> I load the modules with modprobe zaptel and modprobe wctdm.
> 
> When I run ztcfg -vv I have this:
> 
> Zaptel Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> 
> 1 channels configured.
> 
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)

This means your /etc/zaptel.conf is incorrect. Start by correcting it.
Or maybe the driver has not loaded correctly.

Which OpenVox card is it?

What is the output of:

  lspci
  cat /proc/zaptel/*

> zaptel.conf:
> 
> loadzone=es
> defaultzone=es
> fxsks=1

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir