[asterisk-users] Que on A2Billing

[Nitesh Divecha]

Thanks Man...

Do I need to change my context in sip.conf to "context=a2billing" or 
should I leave it to "context=default"?

You said change the context for SIP Customers to 
"context=a2billing-did", do I have to create this context or A2Billing 
will generate by itself?

Cheers,
Nitesh



Guillermo Salas M. wrote:
> On Fri, 2007-06-15 at 12:19 -0400, Nitesh Divecha wrote:
>   
>> Thanks everyone,
>>
>> OK, I got everything working... I manage to create a SIP Customer with a 
>> real DID number and configured an ATA with the DID number. ATA can login 
>> and can make calls out without any issues.
>>
>> But incoming calls are failing... As soon as the call hits Asterisk, 
>> A2Billing script runs and ask for PIN Number... I checked the context 
>> for my DID it shows "context=a2billing" and under sip.conf 
>> "context=a2billing".
>>
>> If I change the default context under sip.conf to "context=default", 
>> then the calls are failing... meaning I do not get any response back, 
>> but on *CLI debug show that its failing to look for the DID number. 
>> Well, I know this is due to my DID is in  "context=a2billing".
>>
>> Anyone can suggest how can I fix this... I want to ring my incoming to 
>> that ATA which has DID assigned.
>>     
>
> You need to setup the DID on the DID section of a2billing.
>
> First create one SIP/IAX2 configuration for your DID provider and assign
> the context a2billing-did.
>
> Later on the DID section, add the DID Provider, add the DID number and
> asign one destination to the DID (your ata card number) or any SIP
> extension enabling the "voip call" radius button.
>
> Try it.
>
> Regards,
>
>
>