[asterisk-users] g729

[Ed Nuñez]

Just wanted to update anyone interested in this issue.

If I monitor a g729 SIP channel using ChanSpy, I am getting the same error
as when I use MixMon.




-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ed Nuñez
Sent: Thursday, June 07, 2007 12:14 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] g729

Oddly enough the call was being recorded.  In any case in case anyone is
having the same problem, here is what did to get rid of the errors.  I am
now using Monitor instead of MixMonitor as Jaswinder suggested.

Thanks

exten =>
_1NXXNXXXXXX,1,Set(CALLFILENAME=/var/spool/asterisk/monitor/CONTINEX-${CALLE
RID:6}-${EXTEN}-${TIMESTAMP}-OUT)
exten => _1NXXNXXXXXX,2,Set(CDR(accountCode)=${CALLERID}-${TIMESTAMP})
exten => _1NXXNXXXXXX,3,Set(CDR(UserField)=${MONITOR_FILENAME})
exten => _1NXXNXXXXXX,4,Set(CALLERID(number)=14073844200)
exten => _1NXXNXXXXXX,5,Monitor(${CALLFILENAME}.wav49||mb)
exten => _1NXXNXXXXXX,6,Dial(SIP/3756${EXTEN}@nextone) 




-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jaswinder
Singh
Sent: Wednesday, June 06, 2007 11:47 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] g729

I think asterisk first converts audio stream to slin for recording to
a wav file . Since you are using hardware g729 transcoder i think this
is what is causing the problem . Is the calla actually being recorded
?  I suggest that you use monitor application since it can directly
record g729 audio stream and run some cron script with sox mixing the
IN and OUT files in 1 file .

On 06/06/07, Ed Nuñez <enunez at netoneint.com> wrote:
> Yes
>
> This is my extensions.conf entry.
>
> exten => _1NXNXXXXXXX,1,Set(DYNAMIC_FEATURES=automon)
> exten =>
>
_1NXXNXXXXXX,2,Set(CALLFILENAME=/var/spool/asterisk/monitor/CONTINEX-${CALLE
> RID}-${EXTEN}-${TIMESTAMP}-OUT)
> exten =>
>
_1NXXNXXXXXX,3,Set(TOUCH_MONITOR=CONTINEX-${CALLERID}-${EXTEN}-${TIMESTAMP}-
> OUT)
> exten => _1NXXNXXXXXX,4,Set(CDR(accountCode)=${CALLERID}-${TIMESTAMP})
> exten => _1NXXNXXXXXX,5,Set(CDR(UserField)=${MONITOR_FILENAME})
> exten => _1NXXNXXXXXX,6,Set(CALLERID(number)=14073844200)
> exten => _1NXXNXXXXXX,7,MixMonitor(${CALLFILENAME}.wav49)
> exten => _1NXXNXXXXXX,8,Dial(SIP/3756${EXTEN}@nextone,,wW)
>
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jaswinder
> Singh
> Sent: Wednesday, June 06, 2007 4:28 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] g729
>
> Are you trying to record the conversation as well ?
>
> On 06/06/07, Ed Nuñez <enunez at netoneint.com> wrote:
> >
> >
> >
> >
> > I installed a hardware g729 codec card in my asterisk, and I'm getting
the
> > following error when calling from a g729 sip extension to a SIP trunk
also
> > set to g729.  The call goes through just fine, but these error messages
> keep
> > flying by until I disconnect the call.
> >
> >
> >
> > Any ideas?
> >
> >
> >
> > ERROR[11871]: channel.c:1316 queue_frame_to_spies: Translation to slin
> > failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11851]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11864]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11851]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11871]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11864]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11871]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11851]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11864]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11851]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> >
> > Jun  5 18:24:01 ERROR[11871]: channel.c:1316 queue_frame_to_spies:
> > Translation to slin failed, dropping frame for spies
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users