[asterisk-users] Bridged PRI calls - processor involvement?

[Steve Hanselman]

On a zaptel TE410p, when a call is bridged PRI - PRI how much involvement does the processor have?
 
We're now seeing chunks of missing audio and I can't tell whether this is due to a kernel upgrade or to a zaptel/libpri/asterisk upgrade.
 
I'm not seeing missed interrupts (from a cat of the proc/zaptel files), any other ideas on how I could go about tracking this down?
 
I'm thinking of enabling the debug options on the module to see if this can throw any further light on the problem.
 
As I say, all was fine, the te410 lives on its own interrupt and all was fine until a few weeks back.
 


The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk