[asterisk-users] Problem to park the call with #700

[Dovid B]

What kind of phone are you using ? I had an issue with the Polycom and using 
any extension with # (prob. dial plan modification on the phone which I 
never had time to look in to).
----- Original Message ----- 
From: <lavarini at sci.univr.it>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, June 05, 2007 1:25 PM
Subject: [asterisk-users] Problem to park the call with #700


Hi all,
    I have a problem to park the call with #700 when the SIP phone and the
asterisk PBAX run on the same machine.

Call parking works well if the SIP phone that I use is on a remote pc in
comparison with the asterisk on the which it is registered. If the
sipphone is in the same pc where asterisk is installed the command #700
doesn't work, and in the asterisk's CLI I can see no action genereted by
the command #700. I have also used the Dial options 't' e 'T' to give the
park permission both the caller and the called. My Asterisk uses a remote
dialplan on a DB.

Thank you.