No subject

      <digitmap
=20
dialplan.digitmap=3D"[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxx=
x
x|[2-9]xxxT"
         dialplan.digitmap.timeOut=3D"3|3|3|3|3|3"/>

Don't think it's been modified from the original supplied.

...brig

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jerry
Jones
Sent: Wednesday, March 26, 2008 9:27 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Spam:Re: [asterisk-users] Dialing off-hook with Polycom
SoundPoint IP 430

What does your digitmap on your phone look like? This is what =20
controls sending the call to * when it recognizes a complete dial =20
pattern. The phone does not send digit by digit. If it is waiting for =20
you to press send, then it does not recognize your pattern.


On Mar 26, 2008, at 8:18 AM, Brig C. McCoy wrote:

> Hi...
>
>
>
> I've been fighting this for a while now, trying clean builds of =20
> Asterisk 1.14.18, 1.14.19rc3, and then 1.6 Beta 6 today.
>
>
>
> No workee. L
>
>
>
> Here's the results for various calls made off-hook (push the blue =20
> Speakerphone button on the Polycom 430):
>
>
>
> 988852700 - Phone waits for me to either hit the soft-key "Send" or =20
> "EndCall". If I hit "Send", it dials through with no problem.
>
> 98168852700 - Before I get the last "0" pressed, the phone presents =20
> me with a second dial tone and a prompt at the top of the screen, =20
> "Enter more digits". Asterisk console presents
>
>
>
> "=3D=3D Using SIP RTP CoS mark 5"
>
>
>
> 917852963296 - Before I get the "96" pressed, results as =20
> immediately above.
>
>
>
> If I dial these numbers with the phone on-hook, and press "dial" =20
> they work fine.
>
>
>
> If I modify my dialplan to remove the dial nine requirement, all =20
> three methods of dialing out, off-hook, work fine...although I do =20
> have to press "Send" when dialing 8852700.
>
>
>
> The seemingly relevant portion of the dialplan is as follows:
>
>
>
> ;********************************************************************
>
> ; BEGIN - Outbound Call Handling
>
> ;********************************************************************
>
>           ;
>
> [outbound-local]
>
>      exten =3D> _9NXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})
>
>      exten =3D> _9NXXXXXX,n,Congestion()
>
>      exten =3D> _9NXXXXXX,n,Hangup()
>
>
>
>      exten =3D> _9NXXNXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})
>
>      exten =3D> _9NXXNXXXXXX,n,Congestion()
>
>      exten =3D> _9NXXNXXXXXX,n,Hangup()
>
>
>
>      exten =3D> 911,1,Dial(${TRUNK0}/911)
>
>      exten =3D> 9911,1,Dial(${TRUNK0}/911)
>
>
>
> [outbound-long-distance]
>
>      exten =3D> _91NXXNXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})
>
>      exten =3D> _91NXXNXXXXXX,n,Congestion()
>
>      exten =3D> _91NXXNXXXXXX,n,Hangup()
>
>
>
> [hang-up]
>
>           ; Hang up
>
>           ;
>
>      exten =3D> s,1,Playback(thank-you-for-calling)
>
>      exten =3D> s,n,Playback(goodbye)
>
>      exten =3D> s,n,Hangup()
>
>           ;
>
>           ;
>
> ;********************************************************************
>
> ; END - Outbound Call Handling
>
> ;*******************************************************************
>
>
>
> The only difference between the Asterisk versions is the presence =20
> on the Asterisk console of an error message with Asterisk 1.4.18 =20
> and 1.4.19rc3, which is similar to the one noted on the forums: =20
> "NOTICE[6145]: chan_sip.c:13795 handle_request_invite: Failed to =20
> authenticate user "6000" <sip:6000 at 10.10.xxx.xxx>;tag=3Dwhatever it =20
> was" I do not see that error message on the Asterisk console for =20
> 1.6 Beta 6.
>
>
>
> The forums note which seems in the neighborhood is at
>
>
>
>                 http://forums.digium.com/viewtopic.php?=20
> p=3D63872&sid=3Daff61bbd5ddeea61bc831239b220db23
>
>
>
> Anyone have any bright ideas on what might be wrong and/or =20
> troubleshooting tips?
>
>
>
> ...brig
>
> --
>
> Please direct emails to ITHelpDesk at tkaccess.com or call =20
> 816-767-5549. This will help with issues getting full exposure to =20
> the dept and allow for the quickest response.
>
>
>
> Brig C. McCoy
>
> IT Help Desk
>
> ThyssenKrupp Access Corporation
>
> 4001 East 138th Street
>
> Grandview, MO 64030 USA
>
> Phone: +1 816-767-5577
>
> Fax:       +1 816-765-6459
>
> Email: Brig.McCoy at tkaccess.com
>
> Internet: www.tkaccess.com  www.thelev.com
>
>
>
> "Committed to Improving the Quality of Life. ThyssenKrupp Access, =20
> the world's most trusted name in
> accessibility and home elevator solutions"
>
>
>
> As you are aware, messages sent by e-mail can be manipulated by =20
> third parties. For this reason our e-mail messages are usually not =20
> legally binding. This electronic message (including any =20
> attachments) contains confidential information and may be =20
> privileged or otherwise protected from disclosure. The information =20
> is intended to be for the use of the intended addressee only. =20
> Please be aware that any disclosure, copy, distribution or use of =20
> the contents of this message is prohibited. If you have received =20
> this e-mail in error please notify me immediately by reply e-mail =20
> and delete this message and any attachments from your system. Thank =20
> you for your cooperation.
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users