No subject
Thu Jul 12 09:23:04 CDT 2007
Dial(UniCall/g1|300|)
Where is the number you want to reach?
I'd expect to see
Dial(Unicall/g1/1234567890|300)
To reach number 1234567890
- Mois=E9s Silva
On Jan 30, 2008 1:21 PM, Roger C. Beraldi Martins
<rogerberaldi at gmail.com> wrote:
> Dears,
>
> After weeks trying to contact support of my telecom about 'Seize Ack'
> because that is not returned, was a lock for make calls on my E1s.
>
> Now I receive back de Ack and get ready to make calls, but the technical
> support reports to me that my attempts to call do not send any digits t=
o
> the oder site (telecom station). 8 seconds after start 'Unicall event
> Dialing' the line is disconnected, like when you take up the line and hol=
d
> without press any digits, after some seconds you got the congestion sign=
al.
>
> Just for consideration I receive call without any problems, provided that
> performed the first setup.
>
> I have use http://www.voip-info.org/wiki/view/Asterisk+MFC+R2 to do my
> configuration, sources are:
> http://www.moythreads.com/astunicall/files/astunicall-1.4.9-0.1.tar.gz
>
> zaptel-1.4.4-6
> asterisk-1.4.9
> libsupertone-0.0.2-1
> spandsp-0.0.4-1
> libunicall-0.0.3-1
> libmfcr2-0.0.3-1
>
> The only difference is I have use the sources to make a SRPM -> RPM files=
on
> CentOS 5.
>
> Here is my config files:
>
> zaptel.conf
>
> loadzone =3D br
> defaultzone =3D br
>
> span=3D1,1,0,cas,hdb3
> span=3D2,2,0,cas,hdb3
> span=3D3,3,0,cas,hdb3
> cas=3D1-15:1101
> cas=3D17-31:1101
> cas=3D32-46:1101
> cas=3D48-62:1101
> cas=3D63-77:1101
> cas=3D79-93:1101
>
> unicall.conf
>
> [channels]
> loglevel=3D255
> language=3Dpt_BR
> context=3Dfrom-pstn
> usecallerid=3Dyes
> hidecallerid=3Dno
> immediate=3Dno
> callwaitingcallerid=3Dyes
> threewaycalling=3Dyes
> transfer=3Dyes
> cancallforward=3Dyes
> callreturn=3Dyes
> echocancel=3Dyes
> echocancelwhenbridged=3Dyes
> rxgain=3D0.0
> txgain=3D0.0
> faxdetect=3Dboth
> protocolclass=3Dmfcr2
> ;protocolvariant=3Dbr,20,4,x,max-seize-wait-ack=3D10000
> protocolvariant=3Dbr,20,4
> protocolend=3Dcpe
> group=3D1
> callerid=3Dasreceived
> channel=3D>1-15
> channel=3D>17-31
> channel=3D>32-46
> channel=3D>48-62
> channel=3D>63-77
> channel=3D>79-93
> protocolclass=3Dmfcr2
>
>
> Here is the LOGS when I try do make calls
>
> [Jan 30 16:41:17] VERBOSE[10717] logger.c: -- Executing
> [s at macro-dialout-trunk:32] Dial("SIP/4805-0935d828", "UniCall/g1|300|") i=
n
> new stack
> [Jan 30 16:41:17] DEBUG[10717] chan_unicall.c: unicall_call called - 'g1=
'
> [Jan 30 16:41:17] DEBUG[10717] chan_unicall.c: unicall_call caller id -
> '4805'
> [Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Call
> control(1)
> [Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Make c=
all
> [Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Creatin=
g a
> new call with CRN 32769
> [Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 0001 -=
>
> [1/DIALING /Seize /Idle ]
> [Jan 30 16:41:17] VERBOSE[10717] logger.c: -- Called g1
> [Jan 30 16:41:17] NOTICE[10717] chan_unicall.c: Unicall/1 event Dialing
> [Jan 30 16:41:17] NOTICE[10717] chan_unicall.c: Exception on 15, channel =
1
> [Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 <-
> 1111 [1/DIALING /Seize /Idle ]
> [Jan 30 16:41:17] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 g on =
->
> [2/DIALING /Group I /DNIS ]
> [Jan 30 16:41:25] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 <-=
4
> on [2/DIALING /Group I /DNIS ]
> [Jan 30 16:41:25] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 g off =
->
> [2/DIALING /Group I /DNIS ]
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 <-=
4
> off [2/DIALING /Group I /DNIS ]
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Far en=
d
> disconnected(cause=3DSwitching equipment congestion [42]) - state 0x40
> [Jan 30 16:41:26] NOTICE[10717] chan_unicall.c: Unicall/1 event Far end
> disconnected
> [Jan 30 16:41:26] NOTICE[10717] chan_unicall.c: CRN 32769 - far
> disconnected cause=3DSwitching equipment congestion [42]
> [Jan 30 16:41:26] VERBOSE[10717] logger.c: -- Channel 0 got hangup
> [Jan 30 16:41:26] DEBUG[10717] chan_unicall.c: needcongestion
> [Jan 30 16:41:26] VERBOSE[10717] logger.c: -- UniCall/1-1 is
> circuit-busy
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Channel
> gains
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Channel
> switching
> [Jan 30 16:41:26] DEBUG[10717] chan_unicall.c: Hangup: channel: 1 index =
=3D
> 0, normal =3D 15, callwait =3D -1, thirdcall =3D -1
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Call
> control(7)
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Drop
> call(cause=3DNormal Clearing [16])
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 Cleari=
ng
> fwd
> [Jan 30 16:41:26] WARNING[10717] chan_unicall.c: MFC/R2 UniCall/1 1001 -=
>
> [2/FAR DISC/Clear fwd B /Idle ]
> [Jan 30 16:41:26] DEBUG[10717] chan_unicall.c: Updated conferencing on 1,
> with 0 conference users
> [Jan 30 16:41:26] VERBOSE[10717] logger.c: -- Hungup 'UniCall/1-1'
> [Jan 30 16:41:26] VERBOSE[10717] logger.c: =3D=3D Everyone is busy/cong=
ested
> at this time (1:0/1/0)
>
>
> If someone can help me I would be very grateful.
>
> Best Regards,
>
> --
>
> Roger C. Beraldi Martins
> Fone: 55 41-8828-7068
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--=20
"I do not agree with what you have to say, but I'll defend to the
death your right to say it." Voltaire
More information about the asterisk-users
mailing list