[asterisk-users] Zaptel channel reservation

[Tzafrir Cohen]

On Tue, Jul 31, 2007 at 10:06:30AM +0200, Jack wrote:
> Tzafrir Cohen schrieb:
> > On Mon, Jul 30, 2007 at 02:01:49PM +0200, Jack wrote:

> >> signalling=pri_cpe
> >> channel => 29-31
> >>     
> >
> > and then in extensions.conf:
> >
> > [hangup-calls]
> > ; not sure that this is precisly the right thing to do:
> > exten => s,1,Hangup
> >
> >   
> This is a solution I was thinking about too, but there is one major problem:
> 
> When there is a outgoing call, asterisk takes the first available 
> channel , in case there are no active calls this is Zap/22 for outgoing 
> calls in my configuration. If there is a incoming call immediatly after 
> the outgoing call is hangup, asterisk (or the telco?) does not take the 
> first available channel - which would be Zap/1 - it takes Zap/22 
> instead. So with this solution this incoming call would get lost even 
> when there are no other incoming calls at all.

This is because you use Dial(Zap/g3) . Use Dial(Zap/G3) to make asterisk
start from the last.

You would then need a higher load for calls to be wasted that way.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir