[asterisk-users] Locking a device to a codec

[Matt]

You sure about that?
Having a config that looks like this:
port = 5060           ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0    ; Address to bind to (all addresses on machine)
disallow=all
allow=ulaw
allow=g726
context = from-sip-external ; Send unknown SIP callers to this context
callerid = Unknown
pedantic=no
progressinband=no

And then a user that looks like this:
[570601]
username=570601
accountcode=75415
type=friend
secret=6edfa
qualify=yes
port=5060
pickupgroup=
nat=yes
mailbox=570601 at default
host=dynamic
dtmfmode=rfc2833
disallow=all
allow=g729
context=from-internal
canreinvite=no
callgroup=
callerid="Test VoIP Accounts" <570601>

Seemed to lock EVERYONE to using g729!!!

On 7/27/07, Jaswinder Singh <vicky.r at gmail.com> wrote:
> in ur sip.conf under the device definition you can set it
>
> for example device name is asterisk is pap2
>
> [pap2]
> username=pap2
> secret=blabla
> type=friend
> disallow=all
> allow=g729
>
> Then asterisk will only use g729 for incoming as well as outgoing calls on
> this device .
>
>
> On 27/07/07, Matt <mhoppes at gmail.com> wrote:
> > Right.. what I'm asking is:
> >
> > If I set my PAP2T to use G723 or G729.... outgoing calls from that
> > device go in that format.
> > However, incoming calls to the device from asterisk are running at
> > G711u.  The PBX will access any format G711u, G723, G729 or GSM.
> > What do I need to do to make asterisk use the same codec back to the
> > ATA as it is using to the PBX?
> >
> > On 7/27/07, dave cantera <david.cantera at iacnet.net> wrote:
> > >
> > >  baji, mhoppes,
> > >  remember, if you have Only the g729 codec allowed or if this is the
> only
> > > allow= entry in the sip.conf file, callers requesting any other codec
> will
> > > be rejected....
> > >  daveC
> > >
> > >
> > >  Baji Panchumarti wrote:
> > >  On 7/27/07, Matt <mhoppes at gmail.com> wrote:
> > >
> > >
> > >  Can someone comfirm my logic here?
> > >
> > > If I want a phone to use G729.... I can set it to use G729... do I
> > > also need to set it in Asterisk? I'm thinking no... as long as
> > > asterisk WILL do G729... if that's all the device accepts it should go
> > > to that codec, yes?
> > >
> > >  (based on my understanding, take it for what it is worth)
> > >
> > >  if allow=all or allow=g729 is in your
> > >  asterisk configuration (sip.conf / iax.conf ) then asterisk will
> > >  stream packets in g729 (assuming you have any licesnses
> > >  needed in place).
> > >
> > >  -baji.
> > >
> > > --
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > >
> > >
> > >
> > >  --
> > > My wife's sister is in California.
> > > I should buy her a Videophone2008!
> > >
> > > Truly, The Next Best Thing to Being There!
> > > --
> > >
> > > WorldWideVideoPhones.com
> > > 856.380.0894
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >
> > >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>