[asterisk-users] Asterisk 1.2.23 and Sangoma a102 no incoming calldetected

[Erick Perez]

As it turns out the telco was not routing the calls to us, a "little
misktake" they said after 3 days of being with no service.
The line was not CAS, it was CCS, no need to compile unicall.

Whatever they meant with "your card has to be configured with DSS1"
will remain in mystery. Maybe someone here can tell me what they mean.

The configuration I previously listed is valid for lines in Panama
City, Panama. With the telco being Cable & Wireless Panama and the
asterisk with a sangoma A102.

If there's any Cable & wireless tech reading this. Guys, your support
s*cks big time.

Thanks to all for your kind and prompt help.

On 7/28/07, Eric ManxPower Wieling <eric at fnords.org> wrote:
> If you do not have any alarms and PRI debug span 1 still gives you
> nothing then you need to call your telco and say "I'm not getting any
> Q.931 messages on the D-Channel".
>
> Stephen Bosch wrote:
> > Erick Perez wrote:
> >> Yes I do. I even did a "pri debug span 1" and when I call the asterisk
> >> box, it sees nothing.
> >
> > Hmn, well, that's telling.
> >
> > Are you using the correct cable? Is the cable plugged into the correct
> > port on the card? The 102 is a two-port.
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
------------------------------------------------------------
Erick Perez
Panama Sistemas
Integradores de Telefonia IP y Soluciones Para Centros de Datos
Panama, Republica de Panama
Cel Panama. +(507) 6694-4780
------------------------------------------------------------