[asterisk-users] Unicall/Dont know how to handle Accepted

[Victor Toofic]

El Fri, Jul 27 de 2007 a las 11:18 -0500, Carlos Chavez comentaba:
> 	Try changing protocol variant to: protocolvariant=mx,10,4

I've already tried several combinations. I dont know exactly what means
each number but I could get an idea according what I saw in the logs.

Even so, I've tried it and the only difference is:

 CRN 32769 - Offered on channel 0 (ANI: 8147779999, DNIS: 8332, Cat: 1)

Thats why I put 10,10.. because I wanted the ANI to be 10 digits length
and the DNIS 10 digits length.

> 	Usually only you only need the last 4 digits of the DID to identify it.
> Also, you only get 8 digits for the DNIS because that is the maximum
> anyone will dial to get to you (7 if you are in a smaller city).  ANI is
> always 10 in Mexico.

I'm not connecting to any telco, instead I'm connecting the E1 to a CISCO
device which is supposedly to be correctly configured.

Said that, I am realizing that maybe I should put some other value instead
of 'mx'. I will give it a try. If this is correct.. Do you know what
should be there?

Thanks..

--
Victor Toofic