[asterisk-users] Asterisk 1.2.23 and Sangoma a102 no incoming calldetected

[Erick Perez]

Yes I do. I even did a "pri debug span 1" and when I call the asterisk
box, it sees nothing.


On 7/26/07, Idris AVCI <idris.avci at vodatech.com.tr> wrote:
> Do you have any extension in default context of your extensions.conf
> file to accept incoming calls ?
> It must be something like;
>
> exten => 12345678,1,Answer()
> exten => 12345678,2,Playback(Welcome)
> ...
>
> 12345678 = The DID number you are calling to reach E1
>
> Idris
>
>
> -----Original Message-----
> From: Erick Perez [mailto:eaperezh at gmail.com]
> Sent: Thursday, July 26, 2007 7:03 AM
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] Asterisk 1.2.23 and Sangoma a102 no incoming
> calldetected
>
> Hi,
> after many issues we finally managed to make our system do outgoing
> calls with perfect quality.
> However I cannot detect *any* form of incoming call. when I use an
> outside phone to call the E1 connected to the sangoma a102, I
> instantly get a fast busy tone.
>
> My /etc/zaptel.conf is:
> loadzone=us
> defaultzone=us
> #Sangoma A102 port 1 [slot:1 bus:4 span: 1]
> span=1,0,0,ccs,hdb3
> bchan=1-15,17-31
> dchan=16
>
> My /etc/asterisk/zapata.conf is:
> [trunkgroups]
>
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
>
> immediate=no
>
> #include zapata-auto.conf
>
> Zapata-auto.conf has:
> callerid=asreceived
> ;Sangoma A102 port 1 [slot:1 bus:4 span: 1]
> switchtype=euroisdn
> context=from-pstn
> group=0
> signalling=pri_cpe
> channel => 1-15,17-31
>
> Note:
> According to the tech support in the local telco, my E1 should be:
> E1 PRI, CAS, HDB3, NCRC4, DSS1
> However if I configure the card for CAS, it will never connect.
> My card is currently configured (and makes only outgoing calls) as:
> E1 PRI, CCS, HDB3,NCRC4  (i have no idea what dss1 is or where it goes)
>
> My /etc/wanpipe/wanpipe1.conf is:
> [devices]
> wanpipe1 = WAN_AFT_TE1, Comment
>
> [interfaces]
> w1g1 = wanpipe1, , TDM_VOICE, Comment
>
> [wanpipe1]
> CARD_TYPE       = AFT
> S514CPU         = A
> CommPort        = PRI
> AUTO_PCISLOT    = NO
> PCISLOT         = 1
> PCIBUS          = 4
> FE_MEDIA        = E1
> FE_LCODE        = HDB3
> FE_FRAME        = NCRC4
> FE_LINE         = 1
> TE_CLOCK        = NORMAL
> TE_REF_CLOCK    = 0
> TE_SIG_MODE     = CCS
> TE_HIGHIMPEDANCE        = NO
> LBO             = 120OH
> FE_TXTRISTATE   = NO
> MTU             = 1500
> UDPPORT         = 9000
> TTL             = 255
> IGNORE_FRONT_END = NO
> TDMV_SPAN       = 1
> TDMV_DCHAN      = 16
>
> [w1g1]
> ACTIVE_CH       = ALL
> TDMV_ECHO_OFF   = NO
> TDMV_HWEC       = YES
>
> thanks for your help.
>
>
> --
> ------------------------------------------------------------
> Erick Perez
> ------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
------------------------------------------------------------
Erick Perez

------------------------------------------------------------