[asterisk-users] Query

[Tzafrir Cohen]

On Thu, Jul 26, 2007 at 05:25:30PM +0530, sanchal.singh at alliance-infotech.com wrote:
> Hi,
>    I am facing problem in configuring D-channel. I did the following  
> configuration for TE-120P card
> 	/etc/zaptel.conf
> 		span=1,1,0,ccs,hdb3
> 		bchan=1-15,17-31
> 		dchan=16
>     
>        /etc/asterisk/zaptel.conf

/etc/asterisk/zapata.conf
                 """

Right?


> 		group=1
> 		signalling=pri_cpe
> 		switchtype=euroisdn
> 		context=incoming
> 		channel=1-15,17-31
> 
> 	DIGIUM card is connected through cable to another end.On placing call
> from other end to asterisk PBX ( through DIGIUM card ) the following
> error messages is coming on console mode of asterisk 	
> 
> 	Jul 26 17:09:42 WARNING[11925]: chan_zap.c:9148 pri_dchannel: 	PRI
> Error: We think we're the CPE, but they think they're the CPE too.
>                                                                                 	== Primary D-Channel on span 1 down
> 	Jul 26 17:09:43 WARNING[11925]: chan_zap.c:2438 pri_find_dchan: 	No
> D-channels available!  Using Primary channel 16 as D-channel 	anyway!

What is on the other side?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir