[asterisk-users] Asterisk 1.2.23 and Sangoma a102 no incoming call detected

[Erick Perez]

Hi,
after many issues we finally managed to make our system do outgoing
calls with perfect quality.
However I cannot detect *any* form of incoming call. when I use an
outside phone to call the E1 connected to the sangoma a102, I
instantly get a fast busy tone.

My /etc/zaptel.conf is:
loadzone=us
defaultzone=us
#Sangoma A102 port 1 [slot:1 bus:4 span: 1]
span=1,0,0,ccs,hdb3
bchan=1-15,17-31
dchan=16

My /etc/asterisk/zapata.conf is:
[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

#include zapata-auto.conf

Zapata-auto.conf has:
callerid=asreceived
;Sangoma A102 port 1 [slot:1 bus:4 span: 1]
switchtype=euroisdn
context=from-pstn
group=0
signalling=pri_cpe
channel => 1-15,17-31

Note:
According to the tech support in the local telco, my E1 should be:
E1 PRI, CAS, HDB3, NCRC4, DSS1
However if I configure the card for CAS, it will never connect.
My card is currently configured (and makes only outgoing calls) as:
E1 PRI, CCS, HDB3,NCRC4  (i have no idea what dss1 is or where it goes)

My /etc/wanpipe/wanpipe1.conf is:
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 1
PCIBUS          = 4
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = NCRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_SIG_MODE     = CCS
TE_HIGHIMPEDANCE        = NO
LBO             = 120OH
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = 16

[w1g1]
ACTIVE_CH       = ALL
TDMV_ECHO_OFF   = NO
TDMV_HWEC       = YES

thanks for your help.


-- 
------------------------------------------------------------
Erick Perez
------------------------------------------------------------