[asterisk-users] [beginner] Problem of detecting call

[Tzafrir Cohen]

On Tue, Jul 24, 2007 at 03:44:29PM +0000, karim H wrote:
> Hello,
> I have some problem to start asterisk.
> First I have followed a lot of tutorials to complete correctly the install 
> process. Now it works when I type zttool I can see when I am or not 
> connected to the PSTN.
> But, I run asterisk with vvvv verbose and I can't see the call detection.
> There is no detection of the call.
> 
> I have a X100P card FXO with only one line. So only one channel
> I configured my zaptel.conf like this :
> ___________________________________________________________________
> loadzone=fr
> defaultzone=fr
> fxsks=1
> ___________________________________________________________________
> 
> and My zapata.conf like this :
> ___________________________________________________________________
> [trunkgroups]
> 
> [channels]
> 
> language=fr
> context=from-pstn
> signalling=fxs_ks
> rxwink=300 ; Atlas seems to use long (250ms) winks
> ;
> ; Whether or not to do distinctive ring detection on FXO lines
> ;
> ;usedistinctiveringdetection=yes
> 
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> rxgain=0.0
> txgain=0.0
> group=0
> callgroup=1
> pickupgroup=1
> immediate=no
> 
> ;faxdetect=both
> faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no

channel => 1

; next time just use zaptel/xpp/utils/genzaptelconf

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir