[asterisk-users] te110p stays in red alarm

[David Bandel]

Folks,

I installed a te110p to connect to an E-1.  Ensured the jumper is on
for E-1, installed the card, and got the following from the phone
company:
hdb3 encoding (verbally confirmed ccs)
euroisdn switchtype
pri signalling

So I set up zaptel.conf:
span=1,1,0,ccs,hdb3
bchan=1-15
unused=17-31
dchan=16
loadzone=us
defaultzone=us

Card tries to come up but goes into RED alarm.  Occasionally cycles
YELLOW/RED and or RED/RECOVERING or YELLOW/RED/RECOVERING, but always
returns to RED.

Insert the wcte11xp module with a debug=9 option and get the following
in my kernel log:
kernel: Expecting top ca1e, got ffff

C&W Panama says the switch I'm connecting to is an Erickson AXE 10.

Thoughts?

Thanx,

David A. Bandel
-- 
Focus on the dream, not the competition.
            - Nemesis Air Racing Team motto