[asterisk-users] Problem

[Tzafrir Cohen]

On Fri, Jul 20, 2007 at 07:45:32PM -0500, Walter Willis wrote:
> look my zapata.conf
> 
> [channels]
> context=default
> switchtype=national
> signalling=fxs_ks

Power denial will be identified as a hangup.

> rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=1.0
> txgain=1.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> busydetect=yes
> busycount=3
> answeronpolarityswitch=yes
> hanguponpolarityswitch=yes

Those two are meaningless, as your cards will not send polarity reversal
events.

> polarityonanswerdelay=1
> callprogress=no
> musiconhold=default
> channel => 1,2
> 
> add to line:
> busydetect=yes
> busycount=3 but the situation is iqual

Where have you added those lines? Before the "channel" line, I hope.

> 
> have much that it is a clon x100p ???
> 
> # ztcfg -vvvvv
> 
> Zaptel Version: 1.4.4
> Echo Canceller: MG2
> Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> 
> 2 channels configured.
> 
> 
> it is in debian.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir