[asterisk-users] Has anybody used fanless computers of logic supply with asterisk?

[Zeeshan Zakaria]

Darrick, can you tell which mini-itx board you have and what processor it
has on it? I don't them with Pentium processors, instead they have some VIA
C3 and C7 processors, which are completely new to me and I have no idea how
will they perform with Asterisk.

On 7/21/07, Darrick Hartman (lists) <dhartman at djhsolutions.com> wrote:
>
> Zeeshan Zakaria wrote:
> > I want my freedom to setup and configure PBX hardware and software how i
> > want, not how Digium or anybody else wants, so not interested in
> > Asterisk Appliances.
> >
> >
> > So anybody with experience with Supply Logics computers. Or any other
> > recommendations for asterisk pbx casings?
>
>
> The fanless mini-itx boards should be just fine.  There are too many
> factors to give you a definite answer, but I currently use one with a
> TDM400 card.  A majority of the calls on the board are sip with no
> transcoding so there is a very small load on the system (hardly
> noticeable).  If you are doing a ton of transcoding or recording calls,
> your results may be different.
>
> Darrick
> --
> Darrick Hartman
> DJH Solutions, LLC
> http://www.djhsolutions.com
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Zeeshan A Zakaria
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070721/dcb66d8d/attachment.htm