[asterisk-users] priorityjumping not working, Dial goes to n+1 not n+101

[Eric "ManxPower" Wieling]

Did you read UPGRADE.txt?  Priority jumping was deprecated in 1.2.  I 
assume it was removed from 1.4.

Jakub Głazik wrote

> Priorityjumping is totally ignored by my asterisk (tested 1.4.4 and
> 1.4.7.1 on FreeBSD 6.2)
> 
> [general]
> priorityjumping=yes
> 
> With n+101:
> exten => 1337,1,Dial(SIP/zytek,5,Ttj)
> exten => 1337,102,Dial(SIP/zytek,${RINGTIME},${OPTIONS})
> exten => 1337,n,Hangup
> 
>     -- Executing [1337 at firma:1] Dial("SIP/113-087a3000", "SIP/zytek|5|Ttj") in new stack
>     -- Called zytek
>     -- SIP/zytek-087b9000 is ringing
>     -- Nobody picked up in 5000 ms
>   == Auto fallthrough, channel 'SIP/113-087a3000' status is 'NOANSWER'
> 
> With n+1:
> 
> exten => 1337,1,Dial(SIP/zytek,5,Ttj)
> exten => 1337,2,Dial(SIP/zytek,${RINGTIME},${OPTIONS})
> exten => 1337,n,Hangup
> 
> -- Executing [1337 at firma:1] Dial("SIP/113-087c8000",
> "SIP/zytek|5|Ttj") in new stack 
> -- Called zytek
> -- SIP/zytek-087da000 is ringing
> -- Nobody picked up in 5000 ms
> -- Executing [1337 at firma:2] Dial("SIP/113-087c8000",
> "SIP/zytek|720|Ttm") in new stack 
> -- Called zytek
> -- Started music on hold, class 'default', on channel
> 'SIP/113-087c8000' 
> -- SIP/zytek-087b6000 is ringing
> 
> 
> Why? 
>