[asterisk-users] Asterisk and ATA-186 question-- calling one port from the other port..

[Carlos Rojas]

Hello,

I
Check this page:
http://www.asterisk.net.au/general/1/

It's very interesting


Best Regards

Carlos Rojas
On 7/18/07, Dmytro Mishchenko <arkadiamail at aol.com> wrote:
>
> Tim Reimers wrote:
> >
> >
> > Hi -
> >
> > I need to configure Asterisk (Trixbox 2.2) and my ATA-186 with both
> ports.
> >
> > I need to be able to call one port from the other-- the idea is to have
> > two phones in two different locations that _can_ call each other.
> >
> > So, in reading the Asterisk Wiki and other sites, the best documentation
> > I found was this:
> >
> >
> >
> >
> > *http://www.loligo.com/asterisk/Cisco/ATA-186-guide.v20030628.txt*
> > **
> > *"**Note that each line must have it's own distinct and complete
> > configuration, and if you use both lines on the ATA-186, it will
> > REGISTER twice.  Further note that you cannot call one line from the
> > other on the same device using the "direct" extension numbers, so you
> > will have to be clever about naming and aliases within Asterisk.  That
> > is outside the scope of this document."
> > *
> > However, that _specifically_ says that in the provided config, you
> > cannot call one port from the other port using "direct" lines--
> > It does indicate that you CAN in fact work that out, using "naming and
> > aliases" within Asterisk.
> >
> > Therefore, I assume that it IS possible to use an ATA like this---
> > but that the author of this particular doc either doesn't know how (but
> > does know it can be done)
> > or just didn't want to go into it in a low-level howto.
> >
> > So ---
> >
> > Does anyone know how to do this?
>
>
> Check this page:
> http://www.voip-info.org/wiki/view/Cisco+ATA+186+SIP+and+Asterisk+-+HowTo
>
> There is example for configuring two lines.
>
> Dmitry.
>
>
> >
> > thanks, Tim
> >
> >
> >
> > Most days, there are several fires burning at once. Some days, what's
> > burning is your fire extinguisher.
> > To err is human; to truly screw it up requires the root password.
> >
> >
> >
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070718/61539e0e/attachment.htm