[asterisk-users] Asterisk PRI Busy Problem

[Andrew Joakimsen]

On 7/17/07, Jared Smith <jsmith at digium.com> wrote:
>
> On Tue, 2007-07-17 at 12:52 -0400, Andrew Joakimsen wrote:
> > I did a quick test. What happens is Congestion() answers the channel
> > and leaves it open. IE do a 'show channels' and you will see the
> > channel is still open on your end.
>
> What happens in you pass a timeout to the Congestion() application, and
> then hangup the call after that, as show below?
>
> exten => 4340,15,Queue(test,rt,,,10)
> exten => 4340,16,Congestion(3)
> exten => 4340,17,Hangup()
>
> Give that a try and see if it helps.
>
> --
> Jared Smith
> Community Relations Manager
> Digium, Inc.


Yes, that seems to solve Arun's problem. When I do Congestion(1) I receive
approx 1 second of congestion tone and then ringing and the SprintPCS
message "We are unable to complete your call at this time" (because I call
into it from a Sprint mobile phone)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070717/08d7dbfb/attachment.htm