[asterisk-users] asterisk 1.4 and gnugk with ooh323

[yonoko molomo]

Hi,
Thanks for the answer.
Yes, I think both channels are built.
I see following messages at startup:
 Parsing '/etc/asterisk/h323.conf': Found
Creating H.323 Endpoint
 Parsing '/etc/asterisk/users.conf': Found
 Registered channel type 'H323' (The NuFone Network's Open H.323 Channel Driver)
 H.323 listener started chan_h323.so =>
 The NuFone Network's OpenH323 Channel Driver

[and few lines after]
 Parsing '/etc/asterisk/ooh323.conf': Found
 Registered channel type 'OOH323' (Objective Systems H323 Channel Driver)
chan_ooh323.so => (^[[33;40mObjective Systems H323 Channel^[[0;37;40m)

I am trying to use only ooh323 (removing the h323.conf file) but still
does not work.
I believe it is a configuration problem.
Can someone point me to the correct configuration or example? The ones
I have found so far did not help me much.

Thanks

2007/7/16, Dovid B <asteriskusers at dovid.net>:
> There are different h323 channel drivers. You seem to have built both. If
> you try to dial using Dial(h323/.....) then you need h323.conf. If you try
> dialing using Dial(ooh323/.....) then you need ooh323.conf. For me
> personally the ooh323 (can't remember the name of it  - sleep deprivation)
> works better for me.
>
> ----- Original Message -----
> From: "yonoko molomo" <yonokomolomo at gmail.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Monday, July 16, 2007 6:13 PM
> Subject: [asterisk-users] asterisk 1.4 and gnugk with ooh323
>
>
> > Hello all,
> > I have seen some people asking how to configure asterisk to work with
> > h323 but i did not manage to do fix it yet (i am not an asterisk
> > expert).
> > Can someone help me configuring asterisk?
> > It is already compiled asterisk 1.4.5 with H323 support.
> > Everything looks fine.
> > Then i understand i need to configure several files:
> > -sip.conf
> > -ooh323.conf
> > -extensions.conf
> >
> > do i also need to configure the h323.conf?
> >
> > i want asterisk and gnugk in the same machine (lets say ip 192.168.0.10).
> > then sip_client at 192.168.0.100 (telephone number assigned for
> > instance 100) and H323_client at 192.168.0.200 (telephone number
> > assigned 200)
> >
> > how do i configure the files to do this?
> >
> > if i type show channeltypes i see:
> >
> > Type        Description                              Devicestate
> > Indications  Transfer
> > ----------  -----------                              -----------
> > -----------  --------
> > OOH323      Objective Systems H323 Channel Driver    no           yes
> >        no
> > SIP         Session Initiation Protocol (SIP)        yes          yes
> >        yes
> > H323        The NuFone Network's Open H.323 Channel  no           yes
> >        no
> >
> > What does devicestate and trasfer mean? it is set to "no". is this ok?
> >
> >
> > if someone could show me how to  configure the files to do this i
> > would be very grateful.
> >
> > thanks!
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>